Mikrofon

QuadCast 2 S should be placed with the front of the microphone facing the sound source. The side with HyperX logo is the front side. ​

Press the multifunction button to cycle through the adjustment modes. Turn the knob to the desired level. ​ LED Indicators Microphone On - Headset Off = Adjust Microphone Gain Microphone Off - Headset On = Adjust Playback Volume Microphone On - Headset On = Adjust Microphone Monitoring Level

Microphone Power consumption: 5V 220mA (white light) Sample/bit rate: 48kHz/16-bit Element: Electret condenser microphone Condenser type: Three 14mm condensers Polar patterns: Stereo, Omnidirectional, Cardioid, Bidirectional Frequency response: 20Hz - 20kHz Sensitivity: -36dB (1V/Pa at 1kHz) Cable l

Quadcast S User Manual

A. Tap-to-mute sensor B. Gain control knob C. Polar pattern knob D. Headphone jack E. USB-C port F. USB cable G. Mount adapter* *Supports both 3/8” and 5/8” thread sizes

Please see this article if you encounter issues updating your QuadCast S firmware. HyperX QuadCast S - Kingston/KTC QuadCast S Firmware Update 4101 Part Numbers: HMIQ1S-XX-RG/G Description: Fixed an issue that caused unexpected changes in the headphone volume. This is only for the Kingston variation

SoloCast 2 Pro can be used with a Microphone stand or arm with either 3/8" or 5/8" threads.

When the microphone is not muted and no level adjustements are being made, the LED bar will show the microphone's level meter. Press the multifunction wheel to cycle between adjustment modes. Microphone Gain Headphone Volume * Monitor/Playback Mix* *USB connection only. 3.5mm connection required for

FlipCast Quick Start Guide