Pulsefire Haste 2 Pro

What is the mouse skate material? PTFE (Polytetrafluoroethylene).

2.4G Wireless Mode 1. Switch the mouse to 2.4G power mode. 2. Connect the USB wireless dongle to the extension adapter. 3. Connect the extension adapter to a PC or game console using the included USB cable. Keep the USB wireless dongle within 20cm of the mouse for optimal placement Bluetooth Mode 1.

It is recommended to charge your mouse fully before your first use. Connect the mouse to a PC or game console using the USB cable. USB data connectivity will override the selected power mode, forcing the mouse into a wired configuration. The mouse is charged via USB-C, located at the top of the mous

To perform a Factory Reset of the Pulsefire Haste 2 Pro: Hold DPI button and Scroll wheel for 5 seconds. The scroll wheel will flash red 2 times momentarily and disappear once reset has completed. This will reset the following on the mouse: DPI to 800 and 4 profiles Polling Rate to 1000Hz on 2.4GHz

Pulsefire Haste 2 Pro Firmware Update Exit NGENUITY from the System Task Bar on the bottom left corner (Right Click -> Exit). If NGENUITY is not installed nor running on your system, proceed to Step 2. Connect the Mouse to the PC via the USB cable. Run the Mouse updater file and press Update. Press

Pulsefire Haste 2 Quick Start Guide

Can the Grip Tape be removed and stuck back on? The grip tape is designed to be a one-time installation. Once you've applied it, it may not properly stick the second time. Take your time!

To place Pulsefire Haste 2 Pro Wireless into Bluetoogh Pairing Mode. Move mouse power switch to bluetooth icon. Hold the left mouse button, right mouse button, and DPI button simutaneously until the mouse flashes blue. The scroll wheel will flash blue, indicating it is in Pairing Mode. ​ Pairing Mod