Cuffie con microfono

Headphone Driver: Dynamic, 40mm with neodymium magnets Type: Circumaural, closed back Frequency response: 20Hz-20,000Hz Impedance: 16 Ω Sound pressure level: 99dBSPL/mW at 1kHz THD: < 2% Weight: 215g Cable length and type: Headset (1.3m) Connection: Headset - 3.5mm plug (4 pole) Microphone Element E

*Advanced Troubleshooting. Do not attempt if you are unsure. We highly recommend reaching out to the HyperX support team for assistance. - Verify that the DTS APO service "DtsHpXV2Apo4Service" is running. Can be checked in Windows "Services" App. If DTS APO service is not running, try installing Vis

Cloud Stinger Core 7.1 Connecting with 3.5mm Analog ​

Cloud Stinger 2 Core Quick Start Guide

Cloud Stinger Wireless Headset Battery Indicator LED States The headset battery indicator LED indicates the current state of the headset.

​ Status LED Status Battery Level LED Searching: Slow breathing green Connected: 90% - 100% Solid green for 5s 10% - 90% Blinking green for 10s < 10% Blinking red for 10s *Battery level indication *The status LED will automatically turn off to conserve battery life Power Button • Hold for 3 seconds

Guida rapida

Make sure that the HyperX Audio Drivers are installed. Check Windows sound settings and make sure the following devices are assigned correctly: Default playback device: NGENUITY -- 8 Channel Spatial Default playback communications device: NGENUITY -- Chat Default recording device: NGENUITY -- Microp

Plug the headset into the controller via 3.5mm jack

​ Power Status Beep Tone Indicator Power on One tone (high) Power off Two tones (high, low) Volume Status Beep Tone Indicator Setting to 100% maximum volume Three tones (high) Setting to 0% minimum volume Three tones (low) Microphone Mute Status Beep Tone Indicator Microphone muted Two tones (high)