Cuffie con microfono

Setting up with PlayStation 5 1. Connect the wireless USB adapter to the PlayStation 5 console. 2. Go to the home page and select Settings > Sound 3. Under Microphone, set the following: Input Device to USB Headset (HyperX Cloud II Wireless) 4. Under Audio Output, set the following: Output Device: U

Pulsanti funzione Cloud MIX Bluetooth® Pulsante multifunzione App multimediali Premere una volta per riprodurre/mettere in pausa il contenuto multimediale Premi due volte per passare alla traccia successiva Premi tre volte per passare alla traccia precedente Durante le chiamate Premere una volta per

In NGENUITY software, nagivate to the Settings tab. Under "Connected Hardware", find "HyperX Internal Wireless Audio Adapter" and click on "Initiate Pairing Mode". Click on the "Start Pairing" button. The laptop is now in pairing mode. While the headset is powered off, hold down the power button unt

The headset and wireless adapter are automatically paired together out of the box. But if manual pairing is needed, follow the steps below to pair the headset and wireless adapter. 1. While the headset is off, hold the power button until the headset status LED starts blinking red/green rapidly. 2. W

Charging It is recommended to fully charge your headset before first use.

HyperX Cloud Stinger 3 PS Quick Start Guide

Abbinamento manuale delle cuffie e dell'adattatore USB Le cuffie e l'adattatore USB vengono abbinati automaticamente non appena estratti dalla confezione. Tuttavia, se è necessario un abbinamento manuale, seguire i passaggi seguenti per abbinare le cuffie e l'adattatore USB. 1. Con le cuffie spente,

NGENUITY should automatically swap back to the hardware audio endpoints when the software and audio engine are not running. Check Windows sound settings and make sure the following devices are assigned correctly to the hardware endpoints: Default playback device: Headphones (HyperX Cloud Alpha 2 Wir

NGENUITY requires administrative permission to install the drivers. With default User Accoount Control settings, you should receive a pop-up for "DriverInstaller". You will need to click "Yes" for the drivers to install. You may also need to adjust User Account Control settings.

Il software Cloud Orbit è compatibile solo con il sistema operativo Windows.