QuadCast Family

A. Tap-to-mute sensor B. Gain control knob C. Polar pattern knob D. Headphone jack E. USB-C port F. USB cable G. Mount adapter* *Supports both 3/8” and 5/8” thread sizes

QuadCast 2 Quick Start Guide

Microphone Power consumption: 5V 220mA (white light) Sample/bit rate: 48kHz/16-bit Element: Electret condenser microphone Condenser type: Three 14mm condensers Polar patterns: Stereo, Omnidirectional, Cardioid, Bidirectional Frequency response: 20Hz - 20kHz Sensitivity: -36dB (1V/Pa at 1kHz) Cable l

Quadcast Microphone Specifications Microphone Power consumption: 5V 125mA ample/bit rate: 48kHz/16-bit Element: Electret condenser microphone Condenser type: Three 14mm condensers Polar patterns: Stereo, Omnidirectional, Cardioid, Bidirectional Frequency response: 20Hz - 20kHz Sensitivity: -36dB (1V

Tekan tombol multifungsi untuk beralih di antara mode penyesuaian. Putar kenop ke tingkat yang diinginkan. ​​ *Diperlukan koneksi 3,5 mm ​ DIPIMPIN Mikrofon Aktif - Headset Nonaktif = Sesuaikan Penguatan Mikrofon Mikrofon Mati - Headset Hidup = Sesuaikan Volume Pemutaran Mikrofon Aktif - Headset Akt

Tekan dan tahan kenop volume selama 2 detik untuk mengubah pola polaritas.

Press and hold the multifunction control button and tap-to-mute sensor for 10 seconds to factory reset the microphone. All red LEDs (include the top LED ring) will flash when the factory reset has been triggered.

QuadCast 2 S should be placed with the front of the microphone facing the sound source. The side with HyperX logo is the front side. ​

A. Tap-to-Mute Sensor B. LED ring C. Multifunction control D. 3.5mm headphone port E. USB-C port F. USB-C to USB-C cable G. USB-C to USB-A adapter

*HyperX Cloud III Wired Not Included ​