Pusat Dukungan HyperX
Artikel Basis Pengetahuan
Artikel Basis Pengetahuan
Connect directly to computer's USB ports to use microphone.
Knowledge Base Article
•
Quadcast 2 S
Tap the top of the microphone to mute/unmute the microphone. The microphone status LED will indicate the current mute status.
Knowledge Base Article
•
Quadcast 2 S
When the microphone is not muted and no level adjustements are being made, the LED bar will show the microphone's level meter. Press the multifunction wheel to cycle between adjustment modes. Microphone Gain Headphone Volume * Monitor/Playback Mix* *USB connection only. 3.5mm connection required for
Knowledge Base Article
•
FlipCast
Panduan Pengguna HyperX SoloCast 2
Knowledge Base Article
•
SoloCast 2
Why doesn’t QuadCast 2 S work with Sony PlayStation or Nintendo Switch? The QuadCast 2 S leverages USB Audio Class 2 (UAC-2) technology to deliver audio quality, supporting bit depths beyond 24-bit and sampling rates above 96 kHz. Unlike its predecessor, UAC-1, UAC-2 also accommodates additional aud
Knowledge Base Article
•
Quadcast 2 S
Installing Quadcast Microphone the Mount Adapter Secure the included mount adapter onto a microphone boom arm. The mount adapter supports 3/8" and 5/8" thread sizes. Remove both the thumbscrew and nut from the microphone stand. Remove the microphone stand from the microphone. Align the mount adapter
Knowledge Base Article
•
Quadcast
Tekan tombol multifungsi untuk beralih di antara mode penyesuaian. Putar kenop ke tingkat yang diinginkan. Indikator LED Mikrofon Aktif - Headset Nonaktif = Sesuaikan Penguatan Mikrofon Mikrofon Mati - Headset Hidup = Sesuaikan Volume Pemutaran Mikrofon Aktif - Headset Aktif = Sesuaikan Level Pema
Knowledge Base Article
•
Quadcast 2 S
Tekan tombol multifungsi untuk beralih antara dua pola polar mikrofon, yang ditunjukkan oleh cincin LED. Cincin LED - Penuh ke Depan - Kardioid Cincin LED Depan ke Penuh - Omnidirectional
Knowledge Base Article
•
DuoCast
QuadCast 2 S should be placed with the front of the microphone facing the sound source. The side with HyperX logo is the front side.
Knowledge Base Article
•
Quadcast 2 S
PC - The Quadcast's mic monitoring can be disabled by going to Control Panel>Sound>Recording. Select the HyperX microphone and click Properties. Select the Listen tab and then disable "Listen to this device." The Quadcast S can be adjusted through Ngenuity under the Mic monitoring feature MAC - Open
Knowledge Base Article
•
Quadcast