Cloud Family

Memasangkan Headset dan Adaptor USB Secara Manual Headset dan adaptor USB secara otomatis dipasangkan saat dikeluarkan dari kotak. Namun, jika pemasangan manual diperlukan, ikuti langkah-langkah di bawah ini untuk memasangkan headset dan adaptor USB. 1. Saat headset dalam keadaan mati, tekan dan tah

Indikator LED Nirkabel Cloud II ​

Spesifikasi Headset Nirkabel Cloud II Headphone Driver: Dinamis, 53mm dengan magnet neodymium Tipe: Circumaural, Tertutup di bagian belakang Respons frekuensi: 15Hz–20kHz Impedansi: 60 Ω Tingkat tekanan suara: 104 dBSPL/mW pada 1 kHz. Distorsi harmonik total (T.H.D.): ≤ 1%. Berat: 300g Berat dengan

Power off the headset. Carefully pull the right ear cushion from the headset. Unscrew the 4x Phillips screws to separate the driver cover from the right earcup. Gently separate the cover from the earcup to avoid any damage. Locate and remove the battery secured with the connector. Place new battery

Pengaturan Cloud II Wireless (PC) 1. Hubungkan adaptor USB nirkabel ke PC. 2. Hidupkan headset. 3. Klik kanan ikon speaker > Pilih Buka Pengaturan Suara > Pilih Panel Kontrol Suara 4. Di bawah tab Pemutaran, klik “HyperX Cloud II Wireless” dan klik tombol Tetapkan sebagai Default. 5. Klik kanan pada

Mic mute / Mic monitoring button Mic mute toggle - Press the button to turn the mic mute on/off Mic monitoring toggle – Hold the button for 3 seconds to toggle mic monitoring on/off

Usage (Xbox® One) To use the HyperX Cloud II headset with Xbox® One, you will need the Xbox One adapter (sold separately) that plugs into the Xbox® One controller (pictured below.) Because this adapter has built-in volume controls, you will remove the USB control box (that came with your HyperX Clou

PC or Mac PC: Control Panel › Sound › Set Default Playback and Recording to “HyperX Virtual Surround Sound” Mac: Apple® Menu › System Preferences › Sound › Set default output and input to “HyperX Virtual Surround Sound” * Virtual 7.1 surround sound effect output as a 2 channel stereo signal to be us

Connect the USB wireless dongle to your device. Set headset mode switch to the WiFi icon. Power on the headset. Set Input Device to USB Headset (HyperX Cloud III S Wireless). Set Output Device to USB Headset (HyperX Cloud III S Wireless). Set Output to Headphones to All Audio. Set Volume Control (He

Setting up with PC Right-click the speaker icon > Select Open Sound settings > Select Sound control panel. Playback Device Set the Default Device to “HyperX Cloud III Wireless” Recording Device Set the Default Device to “HyperX Cloud III Wireless”