Cloud Family

Articles - Category Page

  • Cloud III Quick Start Guide

    Cloud III Quick Start Guide

    Knowledge Base Article

  • CloudX (Xbox One™) Setup

    Usage (Xbox One™) To use the headset with Xbox One™, connect the 3.5mm plug on the headset directly to the 3.5mm jack on the Xbox™ One controller. If your Xbox One™ controller does not have a 3.5mm jack you will need the Xbox One™ Stereo Headset adapter (sold separately) that plugs into the Xbox One

    Knowledge Base Article

  • (HP OMEN) Cloud II Core Wireless Pairing to USB Dongle

    Pairing to HP OMEN USB dongle 1. Open NGENUITY. 2. Plug in the optional, external USB dongle which came with the headset. 3. If USB wireless dongle is plugged into supported HP OMEN system, NGENUITY will prompt user if they want to pair the headset to the dongle or continue to use direct system conn

    Knowledge Base Article

  • Cloud Core Wireless DTS Manually Pairing the Headset and USB Adapter

    The headset and USB adapter are automatically paired together out of the box. But if the manual pairing is needed, follow the steps below to pair the headset and USB adapter. 1. While the headset is powered off, hold down the power button until the headset status LED starts blinking red/green rapidl

    Knowledge Base Article

  • Cloud III S Wireless Controls

    Status LED Status Adapter Mode Bluetooth Mode Pairing Fast blinking white Fast blinking blue Searching Blinking white Blinking blue Connected Solid-fade white for 5 seconds Solid-fade blue for 5 seconds Power Button Power on / off - Hold button for 2 seconds to power headset on / off. Battery level

    Knowledge Base Article

  • Cloud Silver Usage Xbox One

    Usage (Xbox One™) To use the headset with Xbox One™, connect the 3.5mm plug on the headset directly to the 3.5mm jack on the Xbox One™ controller* If your Xbox One™ controller does not have a 3.5mm jack, you will need the Xbox One™ Stereo Headset adapter (sold separately) that plugs into the Xbox On

    Knowledge Base Article

  • Cloud II Wireless DTS LED Indicator

    Cloud II Wireless DTS LED indicator ​ Charging headsets

    Knowledge Base Article

  • Cloud Mini Tuck-Away Boom Microphone

    Tuck-Away Boom Microphone ​

    Knowledge Base Article

  • Cloud Core Wireless DTS Playstation 5

    1. Go to the home page and select Settings > Sound 2. Under Microphone, set the following: Input Device to USB Headset (HyperX Cloud Core Wireless) 3. Under Audio Output, set the following: Output Device: USB Headset (HyperX Cloud Core Wireless) Output to Headphones: All Audio 4. Under Volume, set H

    Knowledge Base Article

  • Cloud II Overview

    Cloud II Overview ​ A. Leatherette Headband w/ HyperX Logo B. Aluminuk Arm to Adjust Headband C. Attached Cable w/3.5mm input jack D. Detachable Microphone with Adjustable Arm and Condenser E. 3.5mm Audio Input Jack F. Extra Set of Ear Cushions G. Control Box Cable w/ USB Connector and Control Box H

    Knowledge Base Article