Cloud Series

In-line audio control operation The in-line audio control contains a volume wheel to adjust the headphone output volume and a microphone mute slider to mute the microphone. To increase the headset volume rotate the volume wheel clockwise (towards the + sign). To reduce the volume, rotate the volume

Technical Specifications Headset Transducer type: Dynamic 53mm Operating principle: Closed Frequency response: 15Hz-25KHz Nominal impedance: 60 ohm per system Nominal SPL: 98+/-3dB THD: < 2% • Power handling capacity: 150mW Sound coupling to the ear: Circumaural Ambient noise attenuation: Approx. 20

Setting up with PC 1. Connect the wireless USB adapter to the PC. 2. Power on the headset. 3. Right-click Speaker icon > Select Sounds 4. Under the Playback tab, click on “HyperX Cloud Core Wireless” and click on the Set Default button. 5. Under the Recording tab, click on “HyperX Cloud Core Wireles

1. Set Input Device to USB Headset (HyperX Cloud Core Wireless) 2. Set Output Device to USB Headset (HyperX Cloud Core Wireless) 3. Set Output to Headphones to All Audio 4. Set Volume Control (Headphones) to maximum level.

Cloud Usage (PC) To connect the headset to your computer (or other devices) that has both a headphone jack and a microphone jack, connect the headset’s 3.5mm plug to the female jack on the PC extension cable. The PC extension cable has two 3.5mm jacks. The audio plug, which has green stripes, plugs

Cloud Core Quick Start Guide

The headset and USB adapter are automatically paired together out of the box. But if the manual pairing is needed, follow the steps below to pair the headset and USB adapter. 1. While the headset is powered off, hold down the power button until the headset status LED starts blinking red/green rapidl

Mic mute / mic monitoring button Press the button to toggle mic mute on/off LED On – Mic muted LED Off – Mic active Hold the button for 3 seconds to toggle mic monitoring on/off The headset will play a double beep notification indicating mic monitoring has been toggled Volume wheel Scroll wheel up a

Xbox One™ or PS4™ ​ Connecting the Cloud Core 7.1 to consoles

Usage (Xbox One™) To use the headset with Xbox One™, connect the 3.5mm plug on the headset directly to the 3.5mm jack on the Xbox One™ controller* If your Xbox One™ controller does not have a 3.5mm jack, you will need the Xbox One™ Stereo Headset adapter (sold separately) that plugs into the Xbox On