Auriculares

Articles - Category Page

  • HyperX CloudX Stinger 2 Core Xbox Specifications

    Headphone Driver: Dynamic, 40mm with neodymium magnets Form factor: Over ear, circumaural, closed back Frequency response: 10 Hz – 25 kHz Impedance: 32.5 Ω Sensitivity: 95 dBSPL/mW at 1 kHz T.H.D.: ≤ 2% Frame type: Plastic Ear cushions: Soft foam & fabric Microphone Element: Electret condenser micro

    Artículo de la base de conocimientos

  • HyperX Cloud Stinger 2 Wireless Adapter Pairing

    The headset and wireless adapter are automatically paired together out of the box. But if manual pairing is needed, follow the steps below to pair the headset and wireless adapter. 1. While the headset is off, hold the power button until the headset status LED starts blinking red/green rapidly. 2. W

    Artículo de la base de conocimientos

  • Connecting the HyperX Cloud Stinger 2 Core to Console

    Plug the headset into the controller via 3.5mm jack

    Artículo de la base de conocimientos

  • Cloud III S Wireless Battery Replacement

    Power off the headset. Carefully pull the right ear cushion from the headset. Unscrew the 4x Phillips screws to separate the driver cover from the right earcup. Gently separate the cover from the earcup to avoid any damage. Locate and remove the battery secured with the connector. Place new battery

    Artículo de la base de conocimientos

  • Cloud Flight 2 - Charging

    It is recommended to fully charge your headset before first use. ​ Charge Status Status LED Fully Charged Solid Green 61% - 99% Breathing Green 21% - 60% Breathing Yellow < 20% Breathing Red

    Artículo de la base de conocimientos

  • Can the HyperX CloudX Stinger Core Wireless be used on PC?

    The CloudX Stinger Core Wireless headset is designed to be used with the Xbox console out of the box. You can use it on the PC with Microsoft's Xbox Wireless adapter (sold separately).

    Artículo de la base de conocimientos

  • Cloud Stinger S Driver Installer

    HYPERX CLOUD STINGER S – HHSS1SDriver 3.7.9.0 Installer Part Numbers: HX-HHSS1S-AA Description: This is a standalone installer for the Stinger S driver 3.7.9.0. The driver is required for the 7.1 surround sound feature to work correctly in NGENUITY software. Downloads: Download Driver Installer

    Artículo de la base de conocimientos

  • HyperX CloudX Stinger Core Xbox One Setup

    CloudX Stinger Core Xbox One Setup Usage (Xbox One™) To use the headset with Xbox One™, connect the 3.5mm plug on the headset directly to the 3.5mm jack on the Xbox™ One controller * If your Xbox One™ controller does not have a 3.5mm jack, you will need the Xbox One™ Stereo Headset adapter (sold sep

    Artículo de la base de conocimientos

  • HyperX Cloud Stinger Core Wireless for PS Setup and Controls on PC

    Using the Headset Swivel to Mute Microphone Power Button Power on/off – Hold the power button for 3 seconds. Volume Wheel Scroll up or down to adjust the volume level. WARNING: Permanent hearing damage can occur if a headset is used at high volumes for extended periods of time

    Artículo de la base de conocimientos

  • Cloud II Core Wireless Quick Start Guide

    Cloud II Core Wireless Quick Start Guide

    Artículo de la base de conocimientos