Cloud II Series

It is recommended to fully charge your headset before first use.

Manual de usuario inalámbrico Cloud II

Wireless Dongle Method 1. While the headset is off, hold the power button until the headset status LED starts blinking red/green rapidly. 2. While the wireless dongle is plugged in, use a small tool to hold down the pairing button inside the pin hole until the dongle LED starts blinking rapidly. The

Usage (PlayStation® 4) For optimal use with PlayStation® 4 (PS4®), unplug the headset jack from the USB control box and connect audio jack on the headset directly to the PS4 game controller and follow these steps: 1. Turn on your PS4® game console. 2. Navigate to the Settings Menu and select it. 3.

Usage (with Control Box) Connect the headset’s 3.5mm audio jack to the input jack on the USB control box. The USB control box then connects to a computer using the USB connector on the end of the control box. To ensure that HyperX Cloud II is the default audio device, you must follow these instructi

Technical Specifications ​ Headset • Transducer type: Dynamic 53mm with Neodynium Magnets • Operating principle: Closed • Frequency response: 15Hz-25KHz (earphones) • Nominal impedance: 60 ohm per system • Nominal SPL: 98+/-3dB • T.H.D: < 2% • Power handling capacity: 150mW • Sound coupling to the e

Usage (Direct Connect) with No Control Box Connect your headset directly to your computer, game console, or another device (phone or tablet) that has a 3.5mm audio jack.

Plug in the USB dongle and launch NGENUITY. Click on the Headset tab. Click "Install" on the "audio Drivers Required" prompt. Wait until the drivers are finished installing. Click "OK, Will DO" on the "drivers Installed" prompt. Restart your PC.

(HP OMEN) Cloud II Core Wireless User Manual

Controles inalámbricos Cloud II LED de estado Botón de encendido/sonido envolvente 7.1 Mantén pulsado durante 3 segundos para encender/apagar los auriculares. Pulsa para activar o desactivar el sonido envolvente 7.1*. *El sonido envolvente virtual 7.1 se emite como una señal estéreo de 2 canales par