Cloud Family

Cloud Usage (PC) To connect the headset to your computer (or other devices) that has both a headphone jack and a microphone jack, connect the headset’s 3.5mm plug to the female jack on the PC extension cable. The PC extension cable has two 3.5mm jacks. The audio plug, which has green stripes, plugs

While the headset is powered off, hold down the power button until the headset status LED starts blinking red / green rapidly. The headset is now in pairing mode. While the USB wireless dongle is plugged in, use a small tool (eg. paper clip, SIM tray ejector, etc.) to hold down the button inside the

HyperX Cloud III S Wireless User Manual

A. Mic mute / mic monitoring button B. Status LED C. Power button D. USB-C charge port E. Microphone port F. Multifunction button G. Volume wheel H. Mode switch I. Removeable earcup plates J. Detachable microphone K. Microphone mute LED L. USB wireless dongle M. Dongle status LED N. Pairing pin hole

Utilizando la aplicación Ngenuity de aquíVe al panel de auriculares y haz clic en el icono de la batería. Hay varias opciones para los intervalos de tiempo y para desactivar la función por completo.

Usage ​ Please note, all Cloud III Wireless settings configured within NGENUITY on PC (other than the auto-power-off setting) are saved software-side. They will not carry over when using the headset on another platform eg. console.

Cloud II Overview ​ A. Leatherette Headband w/ HyperX Logo B. Aluminuk Arm to Adjust Headband C. Attached Cable w/3.5mm input jack D. Detachable Microphone with Adjustable Arm and Condenser E. 3.5mm Audio Input Jack F. Extra Set of Ear Cushions G. Control Box Cable w/ USB Connector and Control Box H

Cloud II Wireless DTS LED indicator ​ Charging headsets

The headset and USB adapter are automatically paired together out of the box. But if the manual pairing is needed, follow the steps below to pair the headset and USB adapter. 1. While the headset is powered off, hold down the power button until the headset status LED starts blinking red/green rapidl

Usage (Xbox One™) To use the headset with Xbox One™, connect the 3.5mm plug on the headset directly to the 3.5mm jack on the Xbox One™ controller* If your Xbox One™ controller does not have a 3.5mm jack, you will need the Xbox One™ Stereo Headset adapter (sold separately) that plugs into the Xbox On