Microphone

We are aware there is a specific build of the SoloCast microphone that does not currently support PlayStation 5 consoles. This does not affect the majority of SoloCasts, but rather only this one build. The HyperX engineering team is hard at work to develop and deploy a firmware update through our NG

Connect directly to computer's USB ports to use microphone.

Tap the top of the microphone to mute/unmute the microphone. The microphone status LED will indicate the current mute status. ​

​HYPERX SOLOCAST MICROPHONE - HMIS1XFirmware Update Rev. 4104, 4106 Part Numbers: HMIS1X-XX-BK/G Description: These firmware options allow users to disable the flashing status LED while the microphone is muted (v4.1.0.6) or restore the status LED to its original behavior (v4.1.0.4). Please see the r

When the microphone is not muted and no level adjustements are being made, the LED bar will show the microphone's level meter. Press the multifunction wheel to cycle between adjustment modes. Microphone Gain Headphone Volume * Monitor/Playback Mix* *USB connection only. 3.5mm connection required for

HyperX SoloCast 2 User Manual

Why doesn’t QuadCast 2 S work with Sony PlayStation or Nintendo Switch? The QuadCast 2 S leverages USB Audio Class 2 (UAC-2) technology to deliver audio quality, supporting bit depths beyond 24-bit and sampling rates above 96 kHz. Unlike its predecessor, UAC-1, UAC-2 also accommodates additional aud

Installing Quadcast Microphone the Mount Adapter Secure the included mount adapter onto a microphone boom arm. The mount adapter supports 3/8" and 5/8" thread sizes. Remove both the thumbscrew and nut from the microphone stand. Remove the microphone stand from the microphone. Align the mount adapter

Press the multifunction button to cycle through the adjustment modes. Turn the knob to the desired level. ​ LED Indicators Microphone On - Headset Off = Adjust Microphone Gain Microphone Off - Headset On = Adjust Playback Volume Microphone On - Headset On = Adjust Microphone Monitoring Level

Note: The LED ring will present the polar pattern status 3 seconds when switching the polar pattern then shows the current light effect, but the LED will be turned off when muting the microphone.