HyperX ProCast Audio Interface Recommendations

While you can use a wide number of audio interfaces with the ProCast, please confirm your intended audio interface meets the minimum operating specifications for intended mic functionality.

The audio interface will need to be capable of supplying +48V phantom power, and at least 60dB of what’s normally advertised / listed as “gain range." If you also see an advertised value for “dynamic range," normally also in dB units, this is not the specification you need to look at when verifying compatibility. 

While you can try using an audio interface with a lower gain range, you may encounter audio performance issues. 

Please also note that some in-line mic pre-amps which require +48V phantom power themselves do not pass phantom power along to the mic, and thus cannot be used with the ProCast.

Check your pre-amp's manual for clarification on if it also passes phantom power through to the microphone.