Headset

Cloud Revolver/Revolver S Technical Specifications Headphone Driver: Dynamic, 50mm with neodymium magnets Type: Circumaural, Closed back Frequency Response: 12Hz–28,000 Hz Impedance: 30 Ω Sound pressure level: 100.5dBSPL/mW at 1kHz T.H.D.: < 2% Input power: Rated 30mW, Maximum 500mW Weight: 360g Wei

There are several reasons the Orbit S headset battery might not be charging while connected with the USB cable: The USB port the headset is plugged into may not be supplying enough power. This may happen if you are using a USB hub or laptop USB port Some USB ports do not supply power when in a power

Overview ​ A. Durable Steel Frame B. Suspension Headband C. Detachable Noise Cancellation Mic D. Attached cable with 4 pole 3.5mm Plug E. USB Audio Control Box

Cloud MIX 2 Charging It is recommended that the headset be fully charged before first use. When charging, the power status LED indicates the headset’s battery level. 10-minutes charging gives up to 6 hours of playback when the battery is low.

Overview A. Game balance button B. Chat balance button C. Microphone mute button D. Ear cup LED E. USB charge port F. Power button G. Microphone port H. Volume wheel I. Detachable microphone J. Microphone mute LED K. Wireless adapter L. Wireless status light M. USB charge cable

Cloud Stinger Core Wireless for PS Quick Start Guide

Mic mute / mic monitoring button Press the mic mute/mic monitoring button to toggle mic mute on or off. LED On – Mic muted LED Off – Mic active Hold the button for 3 seconds to toggle mic monitoring on or off. Headset volume buttons Press the volume +/- buttons to adjust headset master volume up or

Cloud Alpha S Bass Adjustment Move the bass adjustment sliders up or down to change the amount of bass in the headset. Move the sliders up for more bass. Move the sliders down for less bass.

Configuration with USB Audio Control Box (Mac) For optimal surround, sound performance configure Mac using the steps below. 1. Click the Apple menu, then select ‘System Preferences. 2. In ‘System Preferences’ click on ‘Sound’. 3. Select output then select ‘HyperX Cloud Revolver S’. 4. Select input t

Slide the mode switch to the Bluetooth icon. Press and hold the Power and Multifunction buttons for 2 seconds to enter Bluetooth pairing mode. Pairing mode is active when the LED blinks blue and the voice prompts says "Bluetooth pairing". ​ ​Go to your device Bluetooth settings, search, and connect