Headset

Plug the headset into the controller using the 3.5mm jack

Connect the USB wireless dongle to your device. Set headset mode switch to the WiFi icon. Power on the headset. Set Input Device to USB Headset (HyperX Cloud III S Wireless). Set Output Device to USB Headset (HyperX Cloud III S Wireless). Set Output to Headphones to All Audio. Set Volume Control (He

Cloud Silver Specification Headphone Driver: Dynamic, 53mm with neodymium magnets Type: Circumaural, closed back Frequency response: 15Hz–25,000 Hz Impedance: 60 Ω Sound pressure level: 98dBSPL/mW at 1kHz THD: < 2% Input power: Rated 150mW, maximum 300mW Weight: 309g Weight w/ mic: 322g Cable length

CloudX Flight Headset Status Beep Tone Indicators The headset will emit beep tones to indicate status for power, volume, game/chat balance, microphone mute, mic monitoring, and battery charge.

Read all instructions below, before attempting to replace the battery. Power OFF the headset. Carefully pull the right ear cushion from the headset. Note how it's slotted into the earcup. Unscrew the 4x Phillips screws to separate the driver cover from the right earcup. Gently separate the cover fro

Double press the power button to switch between OMEN gaming laptop connection and USB wireless dongle connection.

Cloud Flight 2 QSG

Overview A. Swivel to mute microphone B. Volume slider C. 3.5mm (4-pole) plug D. USB adapter

Connecting the CloudX Flight 2 via Bluetooth Slide the wireless mode switch to Bluetooth mode. The headset will enter Bluetooth pairing on the first setup. Go to your device Bluetooth settings, search, and connect to “HyperX CloudX Flight 2 Wireless”.

Configuration with USB Audio Control Box (Mac) For optimal surround, sound performance configure Mac using the steps below. 1. Click the Apple menu, then select ‘System Preferences. 2. In ‘System Preferences’ click on ‘Sound’. 3. Select output then select ‘HyperX Cloud Revolver S’. 4. Select input t