Cloud Orbit Family

The USB port the headset is plugged into may not be supplying enough power. Additionally, some PC USB ports may not supply power in "sleep mode" and/or other power-saving modes. Lastly, if the USB charging mode is disabled on the Cloud Orbit, the headset will not charge through USB until the headset

Standard gestures and Twitch mode cannot be used simultaneously in the Orbit software.

Cloud Orbit Software User Manual

Sidetone on the Orbit S headset can be disabled by turning down the microphone volume level until a low double beep plays through the headset. The sidetone feature can be enabled again by turning up the microphone volume until a single beep plays through the headset. *The Orbit S software can also b

Power Button Hold down for 3 seconds > Power on headset Hold down for 5 seconds > Power off headset Press once > Play/pause audio Microphone Mute Move switch up > Disable microphone mute Move switch down > Enable microphone mute Microphone volume wheel Scroll > Adjust microphone volume level Short p

Sidetone on the Orbit headset can be disabled by turning down the microphone volume level until a low double beep plays through the headset. The sidetone feature can be enabled again by turning up the microphone volume until a single beep plays through the headset. *The Orbit software can also be us

There are several reasons the Orbit S headset battery might not be charging while connected with the USB cable: The USB port the headset is plugged into may not be supplying enough power. This may happen if you are using a USB hub or laptop USB port Some USB ports do not supply power when in a power

3D mode cannot be enabled when the Orbit S headset is in Hi-Res mode. Check the current audio settings that are enabled on the headset.

Charging the Headset When the charging cable is connected the LED will indicate the status. Status LED LED solid red > Charging LED off > Fully charged “Battery low” voice prompt plays at 15% battery. To disable USB charging, hold down the headphone volume wheel for 2 seconds.

3D Modes Hold down the 3D button for 2 seconds to change the 3D modes. A voice prompt will tell you which 3D mode the headset is using. 3D Manual* 3D audio and head tracking are enabled. This mode is best used when sitting down and looking at a stationary display, such as when you’re playing on a PC