Quadcast 2

QuadCast 2 should be placed with the front of the microphone facing the sound source. The side with HyperX logo is the front side. ​

Press and hold the multifunction control button and tap-to-mute sensor for 10 seconds to factory reset the microphone. All red LEDs (NOT include the top LED ring) will flash when the factory reset has been triggered.

QuadCast 2 Connecting Headphones *HyperX Cloud III Wired Not Included ​

A. Tap-to-Mute Sensor B. LED ring C. Multifunction control D. 3.5mm headphone port E. USB-C port F. USB-C to USB-C cable G. USB-C to USB-A adapter

Hold and turn the microphone gently to remove or attach microphone to the shock mount.

Here's a diagram of the options with which you can connect and use your QuadCast 2 microphone.

Press the multifunction button to cycle through the adjustment modes. Turn the knob to the desired level. ​​ *3.5mm Connection Required ​ LED Microphone On - Headset Off = Adjust Microphpone Gain Microphone Off - Headset On = Adjust Playback Volume Microphone On - Hedaset On = Adjust Microphone Moni

Press the multifunction button to cycle between adjustment modes, shown by the [microphone] and [headset] LED's. The multifunction control's LED ring will indicate the setting of the currently selected mode. ​

QuadCast 2 Quick Start Guide

Hold the volume knob down for 2 seconds to change the polar pattern