Quadcast 2 Series

Note: The LED ring will present the polar pattern status 3 seconds when switching the polar pattern then shows the current light effect, but the LED will be turned off when muting the microphone.

QuadCast 2 should be placed with the front of the microphone facing the sound source. The side with HyperX logo is the front side. ​

A. Tap-to-Mute Sensor B. LED ring C. Multifunction control D. 3.5mm headphone port E. USB-C port F. USB-C to USB-C cable G. USB-C to USB-A adapter

Tap the top of the microphone to mute/unmute the microphone. The microphone status LED will indicate the current mute status. ​

A. Tap-to-Mute Sensor B. LED ring C. Multifunction control D. 3.5mm headphone port E. USB-C port F. USB-C to USB-C cable G. USB-C to USB-A adapter

Press the multifunction button to cycle through the adjustment modes. Turn the knob to the desired level. ​ LED Indicators Microphone On - Headset Off = Adjust Microphone Gain Microphone Off - Headset On = Adjust Playback Volume Microphone On - Headset On = Adjust Microphone Monitoring Level

Why doesn’t QuadCast 2 S work with Sony PlayStation or Nintendo Switch? The QuadCast 2 S leverages USB Audio Class 2 (UAC-2) technology to deliver audio quality, supporting bit depths beyond 24-bit and sampling rates above 96 kHz. Unlike its predecessor, UAC-1, UAC-2 also accommodates additional aud

Press the multifunction button to cycle through the adjustment modes. Turn the knob to the desired level. ​​ *3.5mm Connection Required ​ LED Microphone On - Headset Off = Adjust Microphpone Gain Microphone Off - Headset On = Adjust Playback Volume Microphone On - Hedaset On = Adjust Microphone Moni

Press the multifunction button to cycle between adjustment modes, shown by the [microphone] and [headset] LED's. The multifunction control's LED ring will indicate the setting of the currently selected mode. ​

QuadCast 2 S should be placed with the front of the microphone facing the sound source. The side with HyperX logo is the front side. ​