麥克風

Connect directly to computer's USB ports to use microphone.

Tap the top of the microphone to mute/unmute the microphone. The microphone status LED will indicate the current mute status. ​

When the microphone is not muted and no level adjustements are being made, the LED bar will show the microphone's level meter. Press the multifunction wheel to cycle between adjustment modes. Microphone Gain Headphone Volume * Monitor/Playback Mix* *USB connection only. 3.5mm connection required for

HyperX SoloCast 2 使用手冊

Why doesn’t QuadCast 2 S work with Sony PlayStation or Nintendo Switch? The QuadCast 2 S leverages USB Audio Class 2 (UAC-2) technology to deliver audio quality, supporting bit depths beyond 24-bit and sampling rates above 96 kHz. Unlike its predecessor, UAC-1, UAC-2 also accommodates additional aud

Installing Quadcast Microphone the Mount Adapter Secure the included mount adapter onto a microphone boom arm. The mount adapter supports 3/8" and 5/8" thread sizes. Remove both the thumbscrew and nut from the microphone stand. Remove the microphone stand from the microphone. Align the mount adapter

按下多功能按鈕可在各種調整模式之間循環切換。 將旋鈕旋轉到所需高度。 ​ LED指示燈 麥克風開啟 - 耳機關閉 = 調整麥克風增益 麥克風關閉 - 耳機開啟 = 調整播放音量 麥克風已開啟 - 耳機已開啟 = 調整麥克風監聽音量

​​ 按下多功能按鈕，即可在麥克風的兩種指向性模式之間切換，LED 指示燈環會顯示切換狀態。 LED環形燈 - 全指向 - 心型指向 LED環形燈，正面到全方位

QuadCast 2 S 應將麥克風正面朝向聲音來源放置。帶有 HyperX 標誌的一側為正面。 ​

PC - The Quadcast's mic monitoring can be disabled by going to Control Panel>Sound>Recording. Select the HyperX microphone and click Properties. Select the Listen tab and then disable "Listen to this device." The Quadcast S can be adjusted through Ngenuity under the Mic monitoring feature MAC - Open