Controller

Go to hyperx.com/ngenuity to download the NGENUITY software. NGENUITY software features include: • RGB lighting customization • Button remapping • Switch actuation • SOCD settings Buttons and Top Plate file Download File downloads also available at Printables

HyperX Clutch Gladiate User Manual

Ensure the Gladiate Xbox Controller is not connected to your device. Wipe gently with a slightly damp, soft cloth (e.g., Microfiber cloth).

Controller Specifications Connection Type: Wired Compatibility: Xbox Series X|S, Xbox One, PC Inputs: USB-C, Mic (3.5mm stereo headset jack) Outputs: Headphones (3.5mm stereo headset jack) Physical Specifications (Metric/Imperial) Length: 155mm / 6.10in Width: 110.56mm / 4.35in Height: 64.68mm / 2.5

HyperX Clutch X-Input & DirectInput On PC, the controller supports both X-Input and DirectInput functionality. By factory default, the controller is in X-Input Mode and will save the last Input Mode selected. Switch between X-Input and DirectInput Place the controller in 2.4G or USB mode. Turn on an

Turbo Turbo can be assigned to individual buttons to emulate repeated button presses. After setting Turbo, press and hold the desired button. Turbo can only be assigned to L3, R3, A, B, X, Y, LT, RT, LB, RB and D-Pad.

Calibration Calibration can address issues related to analog sticks and triggers. To activate calibration mode: Set the mode selection switch to USB. Hold down Start and Select. While still holding down both buttons from the previous step, plug in the USB-C cable. Continue holding down both buttons

​Reset The controller can be manually power cycled by pressing the pinhole button on the rear of the controller. Once you've successfully reset the controller, you must calibrate the device. ​

​​ To connect directly via USB cable (also good for charging at the same time), please connect the controller to the host system using the provided USB-C to USB-A cable and swap it to the cable mode, indicated by the USB symbol. To connect to the 2.4GHz wireless adapter, swap the controller to the 2

​​ Pairing and Connecting The controller must be powered off before attempting to enter pairing mode. 2.4G 1. Set the mode selection switch to 2.4G. 2. Connect the 2.4GHz wireless adapter to the PC. 3. Tap the Home button. The controller will power on and attempt to connect to the 2.4GHz wireless ad