Cloud Stinger Series

Cloud Stinger Wireless Headset Battery Indicator LED States The headset battery indicator LED indicates the current state of the headset.

HYPERX CLOUD STINGER S – HHSS1SDriver 3.7.9.0 Installer Part Numbers: HX-HHSS1S-AA Description: This is a standalone installer for the Stinger S driver 3.7.9.0. The driver is required for the 7.1 surround sound feature to work correctly in NGENUITY software. Downloads: Download Driver Installer

In-line audio control operation The in-line audio control contains a volume wheel to adjust the headphone output volume and a microphone mute slider to mute the microphone. To increase the headset volume, rotate the volume wheel clockwise (towards the + sign). To reduce the volume, rotate the volume

Cloud Stinger Usage (mobile device) To use the headset with a mobile device (or other devices) with a headset jack (4 pole CTIA), connect the 3.5mm plug directly into the headset jack on your device.

Cloud Stinger Wireless Nintendo Switch Compatibility 1. Connect the wireless adapter to a side USB port on the Nintendo Switch dock. 2. Power on the headset. 3. When the wireless adapter status light is solid, the headset is now connected to the adapter. *You may set the USB audio volume on Switch t

Overview A. Swivel to Mute Microphone B. Status LED C. Power Button D. Volume Wheel E. USB Charge Port F. USB Adapter G. Wireless Pairing Pin Hole H. Wireless Status LED I. USB Charge Cable

CHARGE STATUS LED Fully Charged: Solid Green 15%-99%: Breathing Green

Cloud Stinger Wireless Manually Pairing Headset and Wireless Adapter The headset and wireless adapter are already paired together for first-time use. If manual pairing is necessary, follow the steps below to pair the headset and wireless adapter together. 1. Make sure the headset is powered off. 2.

Using the Headset Swivel to Mute Microphone Power Button Power on/off – Hold the power button for 3 seconds. Volume Wheel Scroll up or down to adjust the volume level. WARNING: Permanent hearing damage can occur if a headset is used at high volumes for extended periods of time

Headset Charging When the headset is connected to a charger with the USB charge cable, the battery indicator LED will indicate the charge status. The headset will take approximately 2.5 hours to fully charge.