Pulsefire Haste Family

The default polling rate is 1k Power off the mouse completely. Press and hold the DPI button. While holding down the DPI button, switch the mouse to 2.4G mode. Repeat the cycle to the next polling rate; the wheel LED fast blinks twice. There are 3 default presets: 1000Hz (White) 4000Hz (Cyan) 8000Hz

2.4G Wireless Mode 1. Switch the mouse to 2.4G power mode. 2. Connect USB wireless dongle to the extension adapter. 3. Connect the extension adapter to a PC or game console using the included USB cable. Bluetooth Mode 1. Switch the mouse to Bluetooth power mode. Mouse will flash blue on first setup.

1. Switch the power mode to "OFF". 2. Remove the PTFE Skates with a flat, plastic tool (e.g. spudger, fingernails) to reveal the 4x Torx 6 Security Screws below the feet. 3. Gently separate and lift the top shell from the bottom shell in an upward motion. 4. Locate and remove the battery secured wit

Switch the mouse to 2.4G opwer mode Connect the wireless desktop dongle to a PC or game console using the included USB cable. For omtimal placement, keep the wireless desktop dongle within 20cm of the mouse.

To get the best experience, we recommend fully charging your mouse before its first use. Simply connect it to your PC or game console with the included USB cable. When connected via USB, the selected power mode will be overridden. The battery can last up to 120 hours*. However, Keep an eye on the ba

HyperX Pulsefire Haste 3 Pro Wireless Quick Start Guide

DPI Presets There are 4 default DPI presets: 400 DPI (red) | 800 DPI (blue) | 1600 DPI (yellow) | 3200 DPI (green)

There are 4 default DPI presets. 400 DPI (red) 800 DPI (blue) 1600 DPI (yellow) 3200 DPI (green) Max DPI Supported: Up to 26000 DPI.

You can customize the following features for the Pulsefire Haste 2 Pro through Ngenuity: Lift Off Distance RGB lighting DPI Macros Polling Rate (2.4G/Wired Only) Button re-assignment

If you are using the Pulsefire Haste 2 Pro on a Windows 11 system, and your lighting controls are not responding, Windows Dynamic Lighting (WDL) may be enabled. This will override any NGENUITY lighting controls and behavior, as long as the mouse is connected to the PC. Please check if WDL is enabled