HyperX 支持中心
知识库文章
知识库文章
1. Go to the home page and select Settings > Sound 2. Under Microphone, set the following: Input Device to USB Headset (HyperX Cloud Core Wireless) 3. Under Audio Output, set the following: Output Device: USB Headset (HyperX Cloud Core Wireless) Output to Headphones: All Audio 4. Under Volume, set H
知识库文章
•
Cloud Core Wireless DTS
设置电脑 1. 将无线 USB 适配器连接到电脑。 2. 打开耳机电源。 3. 右键单击扬声器图标 > 选择声音 4. 在播放选项卡下,点击“HyperX Cloud Core Wireless”,然后点击“设置为默认值”按钮。 5. 在“录制”选项卡下,点击“HyperX Cloud Core Wireless”,然后点击“设置为默认值”按钮。 6. 在“播放”选项卡下,确认“HyperX Cloud Core Wireless”已设置为默认设备。在“录制”选项卡下,确认“HyperX Cloud Core Wireless”已设置为默认设备。在“播放”选项卡和“录制”选项卡中选择这些设备时
知识库文章
•
Cloud Core Wireless DTS
云银规格 耳机 驱动单元:动圈式,53毫米,钕磁铁 类型:全罩式,封闭式后背 频率响应:15Hz–25,000 Hz 阻抗:60 Ω 声压级:1kHz 时为 98dBSPL/mW 总谐波失真:< 2% 输入功率:额定150mW,最大300mW 重量:309克 含麦克风重量:322克 线缆长度和类型:耳机(1.3米)+电脑延长线(2米) 连接方式:耳机 - 3.5mm 插头(4 极)+ 电脑延长线 - 3.5mm 立体声和麦克风插头 麦克风 元件:驻极体电容式麦克风 极性模式:单向、降噪 频率响应:50Hz-18,000 Hz 灵敏度:-39dBV(0dB=1V/Pa,1kHz)
知识库文章
•
Cloud Silver
麦克风静音/麦克风监听按钮 按下按钮可切换麦克风静音开关 LED指示灯亮起 – 麦克风已静音 LED 指示灯熄灭 – 麦克风已激活 按住按钮 3 秒钟即可切换麦克风监听的开启/关闭状态 耳机将发出两声提示音,表示麦克风监听功能已开启。 音量轮 上下滚动滚轮调节音量 警告: 长时间以高音量使用耳机可能会造成永久性听力损伤。
知识库文章
•
Cloud Core Wireless DTS
The headset and USB adapter are automatically paired together out of the box. But if the manual pairing is needed, follow the steps below to pair the headset and USB adapter. 1. While the headset is powered off, hold down the power button until the headset status LED starts blinking red/green rapidl
知识库文章
•
Cloud Core Wireless DTS
Cloud Core Wireless DTS User Manual
知识库文章
•
Cloud Core Wireless DTS
Cloud Core使用情况(Xbox One) 要将 HyperX Cloud Core 耳机与 Xbox One 配合使用,您需要 Xbox One 适配器(单独出售),该适配器可插入 Xbox One 控制器(如下图所示)。 将耳机上的 3.5 毫米插孔直接连接到 Xbox One 适配器。
知识库文章
•
Cloud Core