Cloud Alpha Series

Articles - Category Page

  • Cloud Alpha S Bass Adjustment

    Cloud Alpha S Bass Adjustment Move the bass adjustment sliders up or down to change the amount of bass in the headset. Move the sliders up for more bass. Move the sliders down for less bass.

    知识库文章

  • Cloud Alpha Specifications

    Headphone Driver: Custom dynamic, 50mm with neodymium magnets Type: Circumaural, closed back Frequency response: 13Hz–27,000 Hz Impedance: 65 Ω Sound pressure level: 98dBSPL/mW at 1kHz THD: < 1% Weight: 298g Weight w/ mic: 336g Cable length and type: Detachable headset (1.3m) + PC extension cable (2

    知识库文章

  • Cloud Alpha Quick Start Guide

    Cloud Alpha Quick Start Guide

    知识库文章

  • Cloud Alpha Wireless Controls

    Controls Status LED *Battery level indication *The status LED will automatically turn off to conserve battery life Power Button Hold for 3 seconds to power headset on/off Press to hear battery level voice prompt Mic mute / mic monitoring button Press to toggle mic mute on/off LED On – Mic muted LED

    知识库文章

  • Cloud Alpha Wireless Overview

    Overview A. Status LED B. Power Button C. Mic Mute / Mic Monitoring Button D. USB-C Charge Port E. Microphone Port F. Volume Wheel G. Detachable Microphone H. Microphone Mute LED I. USB Adapter J. Wireless Status LED K. Wireless Pairing Pin Hole L. USB Charge Cable

    知识库文章

  • Cloud Alpha Wireless Manually Pairing

    Manually Pairing the Headset and USB Adapter The headset and USB adapter are automatically paired together out of the box. But if the manual pairing is needed, follow the steps below to pair the headset and USB adapter. 1. Power on the headset 2. While the USB adapter is plugged in, use a small tool

    知识库文章

  • Cloud Alpha Wireless setting up DTS APO Drivers

    Plug in the USB dongle and launch NGENUITY. Click on the Headset tab. Click "Install" on the "Audio Drivers Required" prompt. Wait until the drivers are finished installing. Click "Ok, Will Do" on the "drivers Installed" prompt. Restart your PC.

    知识库文章

  • Cloud Alpha Mobile Device Setup

    Usage (mobile device) To use the headset with a mobile device (or other device) with a headset jack (4 pole CTIA), connect the 3.5mm plug directly into the headset jack on your device.

    知识库文章

  • Cloud Alpha PC Setup

    Usage (PC) To connect the headset to your computer (or another device) that has both a headphone jack and a microphone jack, connect the headset’s 3.5mm plug to the female jack on the PC extension cable. The PC extension cable has two 3.5mm jacks. The audio plug, which has green stripes, plugs into

    知识库文章

  • Cloud Alpha Overview

    Cloud Alpha Overview A. Headband adjustment slider B. Detachable noise cancellation mic C. Detachable headset cable D. In-line audio control E. PC Extension cable with 3.5mm stereo and mic plugs

    知识库文章