Pulsefire Haste Family

DPI Presets There are 4 default DPI presets: 400 DPI (red) | 800 DPI (blue) | 1600 DPI (yellow) | 3200 DPI (green)

2.4G Wireless Mode 1. Switch the mouse to 2.4G power mode. 2. Connect USB wireless dongle to the extension adapter. 3. Connect the extension adapter to a PC or game console using the included USB cable. Bluetooth Mode 1. Switch the mouse to Bluetooth power mode. Mouse will flash blue on first setup.

A. Left Click Button B. Right Click Button C. Mouse Wheel D. Forward Button E. Back Button F. USB-C Port G. PTFE Skates H. HyperX Performance Sensor I. Power Mode Switch J. DPI Button K. Extra Mouse Skates L. 8K Wireless Desktop Dongle M. USB Charge/Data Cable

Specifications Shape: Symmetrical Sensor: Pixart PAW3335 Resolution: Up to 16000 DPI DPI Presets: 400 / 800 / 1600 / 3200 DPI Speed: 450 IPS Acceleration: 40G Buttons: 6 Left / Right buttons switches: TTC Golden Micro Dustproof Switch Left / Right buttons durability: 60 million clicks Light effects:

Switch between 1000Hz (default) and 8000Hz polling rate. 1. Hold down the DPI Button. 2. While holding down the DPI button, Connect the mouse to a computer. 3. Continue holding the DPI button until either color (see table below) appears on the mouse wheel. 4. Release the DPI button. The LED will bli

2.4G Wireless Mode 1. Switch the mouse to 2.4G power mode. 2. Connect the USB wireless dongle to the extension adapter. 3. Connect the extension adapter to a PC or game console using the included USB cable. Keep the USB wireless dongle within 20cm of the mouse for optimal placement Bluetooth Mode 1.

To get the best experience, we recommend fully charging your mouse before its first use. Simply connect it to your PC or game console with the included USB cable. When connected via USB, the selected power mode will be overridden. The battery can last up to 120 hours*. However, Keep an eye on the ba

Mouse Specifications Shape - Symmetrical Sensor - HyperX 26K Sensor Resolution - Up to 26000 DPI DPI Presets - 400 / 800 / 1600 / 3200 DPI Speed - 650 IPS Acceleration - 50G Buttons - 6 Left / Right Button - HyperX Switches Left / Right Button Durability - 100 million clicks Light Effects - Per-LED

The default polling rate is 1k Power off the mouse completely. Press and hold the DPI button. While holding down the DPI button, switch the mouse to 2.4G mode. Repeat the cycle to the next polling rate; the wheel LED fast blinks twice. There are 3 default presets: 1000Hz (White) 4000Hz (Cyan) 8000Hz

A. Left-click button B. Right-click button C. Mouse wheel D. DPI button E. Forward button F. Back button G. USB-C port H. HyperX 26K Sensor I. Power mode switch J. USB wireless dongle storage K. Grip tape L. Mouse skates M. USB wireless dongle N. Extension adapter O. USB charge/data cable