Pulsefire Haste 2 Series

HyperX Pulsefire Haste 2 Pro User Manual

The default polling rate is 1k polling rate. Enable 4k Wireless Polling Rate 1. Power off the mouse completely. 2. Press and hold the DPI button. 3. While holding the DPI button, switch the mouse to 2.4G mode. The wheel LED will fast-blink green four times. To revert to the default 1k polling rate,

What is the mouse skate material? PTFE (Polytetrafluoroethylene).

Connect the mouse to a PC or game console containing a USB 2.0 (High-Speed) or higher port.

Bluetooth Pairing To place Pulsefire Haste 2 Mini Wireless into Bluetooth Mode. Moce mouse power switch to Bluetooth icon. Hold the left-click button, right-click button, and DPI button simultaneously until the mouse flashes blue. The scroll wheel will flash blue, indicating it is in Pairing Mode. ​

You can customize the following features for the Pulsefire Haste 2 Pro through Ngenuity: Lift Off Distance RGB lighting DPI Macros Polling Rate (2.4G/Wired Only) Button re-assignment

Pulsefire Haste 2 S DPI Presets There are 4 default DPI presets: 400 DPI (red) | 800 DPI (blue) | 1600 DPI (yellow) | 3200 DPI (green). Max DPI: Up to 26000 DPI

2.4G Wireless Mode 1. Switch the mouse to 2.4G power mode. 2. Connect USB wireless dongle to the extension adapter. 3. Connect the extension adapter to a PC or game console using the included USB cable. Bluetooth Mode 1. Switch the mouse to Bluetooth power mode. Mouse will flash blue on first setup.

DPI There are 4 default DPI presets. Up to 5 DPI levels can be stored on the mouse. Customizing and saving DPI levels can be done within HyperX NGENUITY software.

Can the Grip Tape be removed and stuck back on? The grip tape is designed to be a one-time installation. Once you've applied it, it may not properly stick the second time. Take your time!