Trung tâm hỗ trợ HyperX
Bài viết cơ sở kiến thức
Bài viết cơ sở kiến thức
Headphone Driver: Dynamic, 53mm with neodymium magnets Type: Circumaural, Closed back Frequency response: 15Hz–20kHz Impedance: 60 Ω Sound pressure level: 104dBSPL/mW at 1kHz T.H.D.: ≤ 1% Weight: 300g Weight with mic: 309g Cable length and type: USB charge cable (0.5m) Microphone Element: Electret c
Knowledge Base Article
•
Cloud II Wireless DTS
Cloud Stinger 2 Xbox or PlayStation 5 Setup
Knowledge Base Article
•
Cloud Stinger 2
Volume Wheel Scroll up and down to adjust the volume level.
Knowledge Base Article
•
Cloud III Wireless
You can connect it to your PS4 via either 3.5mm directly into the controller, or using the included USB sound card. Please note that the Game/Chat balance feature is Windows exclusive and will not work with PlayStation consoles.
Knowledge Base Article
•
Cloud Alpha S
Go to hyperx.com/ngenuity to download the NGENUITY software. NGENUITY software features include: RGB Lighting customization. Adjustable auto-shut-off behavior. Battery level indicator. *Note: Support may vary between NGENUITY and NGENUITY beta. Use NGENUITY for: Instant Pair functionality Basic audi
Knowledge Base Article
•
Cloud Flight 2
Make sure that the HyperX Audio Drivers are installed. Check Windows sound settings and make sure the following devices are assigned correctly: Default playback device: NGENUITY -- 8 Channel Spatial Default playback communications device: NGENUITY -- Chat Default recording device: NGENUITY -- Microp
Knowledge Base Article
•
Cloud Alpha 2 Wireless
Cloud Mini Wireless Using with Mobile Devices *Requires 3.5mm headset jack with standard CTIA connection or compatible 3.5mm adapter.
Knowledge Base Article
•
Cloud Mini Wireless
Overview A. Swivel to mute microphone B. Volume slider C. 3.5mm (4-pole) plug D. USB adapter
Knowledge Base Article
•
Cloud Stinger S
Usage (PC) To connect the headset to your computer (or another device) that has both a headphone jack and a microphone jack, connect the headset’s 3.5mm plug to the female jack on the PC extension cable. The PC extension cable has two 3.5mm jacks. The audio plug, which has green stripes, plugs into
Knowledge Base Article
•
Cloud Alpha
Slide the mode switch to Bluetooth. Press and hold both the power button and the multifunction button for 2 seconds. Pairing mode is active when the LED blinks blue and the voice prompt says, "Bluetooth pairing". Go to your device's Bluetooth settings and connect to "HyperX Cloud Flight 2 Wireless".
Knowledge Base Article
•
Cloud Flight 2