Tai nghe

HYPERX CLOUD II HEADSET - Kingston/KTC Firmware Update Rev. 0010 Part Number: KHX-HSCP-xx Description: We have improved the firmware for the HyperX Cloud II USB sound card to enable PS4 compatibility. For information related to the Firmware improvements, please see the "Release Notes” located below.

Power OFF the headset. Carefully pull the right ear cushion from the headset. Unscrew the 4x Phillips screws to separate the driver cover from the right earcup. Gently separate the cover from the earcup to avoid any damage. Locate and remove the battery secured with a connector. Place new battery ma

Cloud Alpha Wireless User Manual

A. Status LED B. Power button C. Mic mute / monitoring button D. 3.5mm headset jack E. USB-C charge port F. Microphone poort G. Wireless mode switch H. Multifunction button I. Volume wheel J. Base station K. Base station USB-C port L. 3.5mm line out port M. 3.5mm line in port N. Detachable microphon

While the headset is powered off and in adapter mode, hold down the power button until the headset status LED starts blinking white rapidly. The headset is now in pairing mode. While the USB wireless dongle is plugged in, use a small tool (e.g. paper clip, SIM tray ejector, etc.) to hold down the bu

Headphone Driver: Dynamic, 50mm with neodymium magnets Form factor: Over ear, circumaural, closed back Frequency response: 10 Hz – 28 kHz Impedance: 32 Ω Sensitivity: 97.5 dBSPL/mW at 1 kHz T.H.D.: ≤ 2% Frame type: Plastic Ear cushions: Memory foam and premium leatherette Microphone Element: Electre

1. Connect the wireless USB adapter to the PlayStation 5 console. 2. Go to the home page and select Settings > Sound 3. Under Microphone set the following: Input Device to USB Headset (HyperX Cloud Alpha Wireless) 4. Under Audio Output set the following: Output Device: USB Headset (HyperX Cloud Alph