Cloud Flight Series

To enable/disable mic monitoring on HyperX CloudX Flight, press and hold the Microphone Mute button for 3 seconds.

Cloud Flight S Specifications Headphone Driver: Dynamic, 50mm with neodymium magnets Type: Circumaural, Closed back Frequency response: 10Hz–20kHz Impedance: 32 Ω Sound pressure level: 99.5dBSPL/mW at 1kHz T.H.D.: < 1% Weight: 310g Weight with mic: 320g Cable length and type: USB charge cable (1m) M

Manually Pairing Headset and Wireless Adapter The headset and wireless adapter are already paired together for first-time use. If manual pairing is necessary, follow the steps below to pair the headset and wireless adapter together. 1. Make sure the headset is powered off. 2. Plug the USB wireless a

Setting up with PC 1. Connect the wireless USB adapter to the PC. 2. Power on the headset. 3. Right-click speaker icon > Select Open Sound settings > Select Sound Control Panel 4. Under the Playback tab, click on “HyperX Cloud Flight S Chat”. Then click on the down arrow next to Set Default and sele

Cloud Flight S Overview ​ A. Up Button - Mic Monitoring Toggle B. Left Button - Game Balance C. Right Button - Chat Balance D. Down Button - Mit Mute Toggle E. Microphone Port F. USB Charge Port G. Status LED H. Power Button I. 7.1 Surround Sound Button J. Volume Wheel K. Detachable Microphone L. Mi

The headset can be used as a wired headphone with a 3.5mm cable (not included). To use the headset in wired headphone mode: 1. Connect the 3.5mm headphone cable to the headphone port on the headset 2. Plug the 3.5mm headphone cable into your device Note: The microphone and volume wheel are not funct

HYPERX CLOUD FLIGHT HEADSET – HSCFFirmware Update Rev. 3116/4103 Part Numbers: HX-HSCF-BK Description: This firmware update contains two different sets of firmware: Rev. 3116 for build AxxLF/BxxLF and Rev. 4103 for CxxLF. The updater will automatically flash the correct firmware based on the build o

Cloud Flight S Firmware Update 4107 Download Firmware

To enable/disable mic monitoring on Cloud Flight S, press the mic monitoring toggle pictured below.