HyperX Destek Merkezi
Bilgi Bankası Makaleleri
Bilgi Bankası Makaleleri
QuadCast 2 S, standından çıkarılarak 3/8” veya 5/8” dişli mikrofon bağlantı aparatlarıyla kullanılabilir.
Knowledge Base Article
•
Quadcast 2 S
Not: Polar desen değiştirildiğinde LED halkası 3 saniye boyunca polar desen durumunu gösterecek, ardından mevcut ışık efektini görüntüleyecektir; ancak mikrofon sessize alındığında LED sönecektir.
Knowledge Base Article
•
Quadcast 2 S
Tap the top of the microphone to mute/unmute the microphone. The microphone status LED will indicate the current mute status.
Knowledge Base Article
•
Quadcast 2
Press the multifunction button to cycle between adjustment modes, shown by the [microphone] and [headset] LED's. The multifunction control's LED ring will indicate the setting of the currently selected mode.
Knowledge Base Article
•
Quadcast 2
QuadCast 2 Connecting Headphones *HyperX Cloud III Wired Not Included
Knowledge Base Article
•
Quadcast 2
Ayar modları arasında geçiş yapmak için çok fonksiyonlu düğmeye basın. Düğmeyi istediğiniz seviyeye çevirin. LED Göstergeler Mikrofon Açık - Kulaklık Kapalı = Mikrofon Kazancını Ayarla Mikrofon Kapalı - Kulaklık Açık = Oynatma Ses Seviyesini Ayarla Mikrofon Açık - Kulaklık Açık = Mikrofon İzleme S
Knowledge Base Article
•
Quadcast 2 S
Here's a diagram of the options with which you can connect and use your QuadCast 2 microphone.
Knowledge Base Article
•
Quadcast 2
A. Tap-to-Mute Sensor B. LED ring C. Multifunction control D. 3.5mm headphone port E. USB-C port F. USB-C to USB-C cable G. USB-C to USB-A adapter
Knowledge Base Article
•
Quadcast 2
QuadCast 2 should be placed with the front of the microphone facing the sound source. The side with HyperX logo is the front side.
Knowledge Base Article
•
Quadcast 2
Press and hold the multifunction control button and tap-to-mute sensor for 10 seconds to factory reset the microphone. All red LEDs (NOT include the top LED ring) will flash when the factory reset has been triggered.
Knowledge Base Article
•
Quadcast 2