Pulsefire Haste Family

You can customize the following features for the Pulsefire Haste 2 Pro through Ngenuity: Lift Off Distance RGB lighting DPI Macros Polling Rate (2.4G/Wired Only) Button re-assignment

If you are using the Pulsefire Haste 2 Pro on a Windows 11 system, and your lighting controls are not responding, Windows Dynamic Lighting (WDL) may be enabled. This will override any NGENUITY lighting controls and behavior, as long as the mouse is connected to the PC. Please check if WDL is enabled

HyperX Pulsefire Haste 3 Quick Start Guide

HyperX Pulsefire Haste 2 Core Wireless User Manual

The default polling rate is 1K Power OFF the mouse completely. Press and hold the DPI button. While holding the DPI button, switch the mouse to 2.4G mode. Repeat cycle to the next polling rate; the wheel LED fast blinks twice. There are 3 default presets: 1000Hz (White) 4000Hz (Cyan) 8000Hz (Magenta

Bluetooth Pairing To place Pulsefire Haste 2 Mini Wireless into Bluetooth Mode. Moce mouse power switch to Bluetooth icon. Hold the left-click button, right-click button, and DPI button simultaneously until the mouse flashes blue. The scroll wheel will flash blue, indicating it is in Pairing Mode. ​

Press and hold the DPI button + Mouse wheel button simultaneously until the mouse LED flashes red ​ Factory Settings DPI Level: 400 / 800 / 1600 / 3200 Polling rate: 1000Hz RGB lighting: Cycle effect Button Assignments

Pulsefire Haste 2 Core Wireless DPI Presets There are 4 default DPI presets: 400 DPI (red) | 800 DPI (blue) | 1600 DPI (yellow) | 3200 DPI (green). Max DPI: Up to 12000 DPI.

Plug the USB cable into the mouse and PC

The Pulsefire Haste 2 Pro has one onboard memory profile for storing a configuration from NGENUITY. Saved settings will remain in memory until either: Being overwritten within NGENUITY -> [Save to Mouse]. A factory reset is performed. On-board mouse settings will carry over onto any system the mouse