Pulsefire Haste 3 Series

Connect the mouse to a PC or game console using the included USB cable. When the battery level drops below 10%, the mouse wheel blinks red. When it's less than 5%, the LED turns off. *USB connectivity will override the selected power mode.

Hold the left click button, right click button, and DPI buttons simultaneously until the mouse LED flashed blue.

Switch the mouse to 2.4G opwer mode Connect the wireless desktop dongle to a PC or game console using the included USB cable. For omtimal placement, keep the wireless desktop dongle within 20cm of the mouse.

The default polling rate is 1K Power OFF the mouse completely. Press and hold the DPI button. While holding the DPI button, switch the mouse to 2.4G mode. Repeat cycle to the next polling rate; the wheel LED fast blinks twice. There are 3 default presets: 1000Hz (White) 4000Hz (Cyan) 8000Hz (Magenta

There are 4 default DPI presets: 400 DPI (Red) 800 DPI (Blue) 1600 DPI (Yellow) 3200 DPI (Green) *Max DPI up to 42000 DPI

There are 4 default DPI presets on the HyperX Pulsefire Haste 3 Mouse: 400 DPI (Red) 800 DPI (Blue) 1600 DPI (Yellow) 3200 DPI (Green) *Max DPI up to 16000 DPI

Connect the mouse to a PC or game console using the included USB cable. USB connectivity will override the selected power mode.

Warning: Improper or forced battery installation may cause permanent damage and is not covered under warranty. ​ Switch power mode to "OFF". Remove the mouse skates with a flat plastic tool to reveal and unscrew the 4x Torx 2 Security screws below. Gently separate and lift the top shell from the bot

*Warning: Improper or forced battery installation may cause permanent damage and is not covered under warranty. ​ Switch power mode to "OFF". Remove the mouse skates with a flat plastic tool to reveal and unscrew the 4x Torx 2 security screws below. Gently separate and lift the top shell from bottom

A. Left Click Button B. Right Click Button C. Mouse Wheel D. Forward Button E. Back Button F. USB-C Port G. PTFE Skates H. HyperX Performance Sensor I. Power Mode Switch J. DPI Button K. Extra Mouse Skates L. 8K Wireless Desktop Dongle M. USB Charge/Data Cable