Controller

​​ ​ Before first trying to use the controller, please charge it to full. Plug the controller into a USB power source using the provided USB-C to USB-A cable. ​ ​​ ​ The LED status bar will indicate charge level, lighting up progressively more as the battery charges to full.

HyperX Clutch Wireless Gaming Controller Quick Start Guide

Clutch Gladiate RGB Analog Sticks and Triggers If the user is experiencing issues with their analog sticks (drifting) or triggers, Calibration Mode will allow them to re-calibrate the analog sticks and triggers. What is Analog Stick Drift? It's when the user doesn't move the analog stick, but in-gam

HyperX Clutch Gladiate RGB Setup Connect the controller with the provided USB cable to your Xbox or PC.

Xbox Series X|S, Xbox One, and PC.

Clutch Gladiate RGB Factory Reset Hold P1, P2, & P3 simultaneously for 5 seconds, until the Power LED flashes and RGB LEDs flash Red at the same time. Note: Controler must not be in Lighting Mode or Programming Mode to function. This will reset the controller to factory settings. All programmable bu

HyperX Clutch Gladiate RGB User Manual

USB-C to C should work, but we can't guarantee compatibility with all cables.

​​ Pairing and Connecting The controller must be powered off before attempting to enter pairing mode. 2.4G 1. Set the mode selection switch to 2.4G. 2. Connect the 2.4GHz wireless adapter to the PC. 3. Tap the Home button. The controller will power on and attempt to connect to the 2.4GHz wireless ad

​​ ​ A. Analog sticks (L3/R3) B. Xbox button C. Power LED D. ABXY buttons E. View button F. D-Pad G. Share button H. Menu button I. Trigger locks J. P1 button K. P2/P3 button L. 3.5mm headset jack M Bumpers (LB/RB) N. Triggers (LT/RT) O. USB-C port P. USB-C to USBA cable