Cloud III Series

Double press the power button to switch between OMEN gaming laptop connection and USB wireless dongle connection.

Slide the mode switch to the Bluetooth icon. The headset will enter Bluetooth pairing on the first setup. Power on the headset. Go to your device Bluetooth settings, search, and connect to “HyperX Cloud III S Wireless”. ​

The Cloud III S Wireless is **not** compatible with Xbox.

Power off the headset. Carefully pull the right ear cushion from the headset. Unscrew the 4x Phillips screws to separate the driver cover from the right earcup. Gently separate the cover from the earcup to avoid any damage. Locate and remove the battery secured with the connector. Place new battery

It is recommended to fully charge your headset before first use. To charge the headset, plug the headset to a USB port with the included USB-C charge cable. When charging the headset, the headset status LED will indicate the current charge status. Charge Status Status LED Fully Charged Solid green 6

The DTS license provided with the Cloud III is not able to be used on Xbox, only PC. The license is accessed on PC by plugging in the Cloud III via the included USB adapter. As the USB adapter does not function on Xbox due to system limitations, the license is also not able to be used on Xbox to acc

Slide the mode switch to the Bluetooth icon. Press and hold the Power and Multifunction buttons for 2 seconds to enter Bluetooth pairing mode. Pairing mode is active when the LED blinks blue and the voice prompts says "Bluetooth pairing". ​ ​Go to your device Bluetooth settings, search, and connect

Mic mute / Mic monitoring button Mic mute toggle - Press the button to turn the mic mute on/off Mic monitoring toggle – Hold the button for 3 seconds to toggle mic monitoring on/off

Connect the USB wireless dongle to your device. Set headset mode switch to the WiFi icon. Power on the headset. Set Input Device to USB Headset (HyperX Cloud III S Wireless). Set Output Device to USB Headset (HyperX Cloud III S Wireless). Set Output to Headphones to All Audio. Set Volume Control (He

Setting up with PC Right-click the speaker icon > Select Open Sound settings > Select Sound control panel. Playback Device Set the Default Device to “HyperX Cloud III Wireless” Recording Device Set the Default Device to “HyperX Cloud III Wireless”