ชุดหูฟัง

Articles - Category Page

  • Cloud II Specifications

    Technical Specifications ​ Headset • Transducer type: Dynamic 53mm with Neodynium Magnets • Operating principle: Closed • Frequency response: 15Hz-25KHz (earphones) • Nominal impedance: 60 ohm per system • Nominal SPL: 98+/-3dB • T.H.D: < 2% • Power handling capacity: 150mW • Sound coupling to the e

    Knowledge Base Article

  • HyperX Cloud Stinger Core Wireless + 7.1 Setup and Controls

    Using the Headset Swivel to Mute Microphone Power Button Power on/off – Hold the power button for 3 seconds. Volume Wheel Scroll up or down to adjust the volume level. WARNING: Permanent hearing damage can occur if a headset is used at high volumes for extended periods of time

    Knowledge Base Article

  • คู่มือผู้ใช้ซอฟต์แวร์ Cloud Orbit

    คู่มือผู้ใช้ซอฟต์แวร์ Cloud Orbit

    Knowledge Base Article

  • Cloud Core Wireless DTS Playstation 5

    1. Go to the home page and select Settings > Sound 2. Under Microphone, set the following: Input Device to USB Headset (HyperX Cloud Core Wireless) 3. Under Audio Output, set the following: Output Device: USB Headset (HyperX Cloud Core Wireless) Output to Headphones: All Audio 4. Under Volume, set H

    Knowledge Base Article

  • การตั้งค่า HyperX Cloud Jet

    วินโดวส์ 11 เพื่อให้แน่ใจว่าชุดหูฟังได้รับการตั้งค่าอย่างถูกต้องบนพีซี โปรดทำตามขั้นตอนด้านล่าง: 1. คลิกขวาที่ไอคอนเสียงในแถบระบบ แล้วเลือก การตั้งค่าเสียง 2. ตั้งค่าอุปกรณ์เอาต์พุตเป็นหูฟัง [HyperX Cloud Jet] 3. ตั้งค่าอุปกรณ์อินพุตเป็นไมโครโฟน [HyperX Cloud Jet] เพลย์สเตชั่น 5 ไปที่หน้าหลักแล้วเลื

    Knowledge Base Article

  • Cloud II Usage Direct Connect without Control Box

    Usage (Direct Connect) with No Control Box Connect your headset directly to your computer, game console, or another device (phone or tablet) that has a 3.5mm audio jack.

    Knowledge Base Article

  • Cloud MIX 2 การใช้งานปุ่มมัลติฟังก์ชัน

    Cloud MIX 2 การใช้งานปุ่มมัลติฟังก์ชัน เมื่อใช้ปุ่ม [มัลติฟังก์ชั่น] จะสามารถควบคุมสื่อต่างๆ ได้ดังต่อไปนี้ สามารถใช้งานได้เมื่อใช้ Bluetooth® หรือดองเกิล USB ที่มีความหน่วงต่ำพิเศษ: เมื่อใช้ปุ่ม [มัลติฟังก์ชั่น] จะสามารถควบคุมการทำงานของโทรศัพท์ได้ดังต่อไปนี้ ใช้งานได้เมื่อใช้ Bluetooth®: หมายเหตุ:

    Knowledge Base Article

  • ภาพรวมของ Cloud Revolver

    ภาพรวมของ Cloud Revolver ​ ก. โครงเหล็กที่ทนทาน B. สายรัดศีรษะแบบแขวน ค. ไมโครโฟนตัดเสียงรบกวนแบบถอดได้ D. สายเคเบิลที่ต่อมาพร้อมปลั๊ก 4 ขั้ว ขนาด 3.5 มม. E. กล่องควบคุมเสียงพร้อมปลั๊กสเตอริโอ 3.5 มม. และปลั๊กไมโครโฟน (2 เมตร)

    Knowledge Base Article

  • Connecting the HyperX Cloud Stinger 2 Core to Console

    Plug the headset into the controller via 3.5mm jack

    Knowledge Base Article

  • การตั้งค่าเกม Cloud Revolver สำหรับ PlayStation ® 4

    วิธีใช้งาน (PlayStation 4) ในการใช้งานชุดหูฟังกับ PlayStation ® 4 (PS4™) ให้เสียบปลั๊ก 3.5 มม. บนชุดหูฟังเข้ากับตัวควบคุมเกม PS4 โดยตรง และทำตามขั้นตอนต่อไปนี้: 1. เปิดเครื่องเล่นเกม PS4 ของคุณ 2. ไปที่เมนูการตั้งค่าแล้วเลือก 3. ไฮไลต์ตัวเลือกเมนู ‘อุปกรณ์’ แล้วเลือก 4. เลื่อนลงไปที่ ‘อุปกรณ์เสียง’

    Knowledge Base Article