ชุดหูฟัง

It is recommended to fully charge your headset before first use. ​ Charge Status Status LED Fully Charged Solid Green 61% - 99% Breathing Green 21% - 60% Breathing Yellow < 20% Breathing Red

1. Connect the wireless adapter to the PC. 2. Power on the headset. 3. Right click speaker icon > Select Open Sound settings > Select Sound Control Panel 4. Under the Playback tab, click on “HyperX Cloud Stinger 2 Wireless” and click on the Set Default button. 5. Under the Recording tab, click on “H

การตั้งค่าด้วย PlayStation 4 1. ตั้งค่าอุปกรณ์อินพุตเป็นชุดหูฟัง USB (HyperX Cloud II Wireless) 2. ตั้งค่าอุปกรณ์เอาต์พุตเป็นชุดหูฟัง USB (HyperX Cloud II Wireless) 3. ตั้งค่าเอาต์พุตเป็นหูฟัง (Output to Headphones) เป็นเสียงทั้งหมด (All Audio) 4. ปรับระดับเสียง (หูฟัง) ให้สูงสุด

Cloud Flight Overview ​ A. Volume Wheel B. Microphone Port C. USB Charge Port D. Analog Headphone Port E. Power Button F. Mic Mute Button G. Detachable Microphone H. Wireless Adapter I. Wireless Status LED J. USB Charge Cable

Plug in the USB dongle and launch NGENUITY. Click on the Headset tab. Click "Install" on the "audio Drivers Required" prompt. Wait until the drivers are finished installing. Click "OK, Will DO" on the "drivers Installed" prompt. Restart your PC.

Slide the wireless mode switch to the Bluetooth symbol. The headset will enter Bluetooth pairing on the first setup. Go to your device Bluetooth settings, search and connect to "HyperX CloudX Stinger 3 Wireless".

​ Status LED Status Battery Level LED Searching: Slow breathing green Connected: 90% - 100% Solid green for 5s 10% - 90% Blinking green for 10s < 10% Blinking red for 10s *Battery level indication *The status LED will automatically turn off to conserve battery life Power Button • Hold for 3 seconds

Pairing to HP OMEN USB dongle 1. Open NGENUITY. 2. Plug in the optional, external USB dongle which came with the headset. 3. If USB wireless dongle is plugged into supported HP OMEN system, NGENUITY will prompt user if they want to pair the headset to the dongle or continue to use direct system conn

Mic mute / Mic monitoring button Mic mute toggle - Press the button to turn the mic mute on/off Mic monitoring toggle – Hold the button for 3 seconds to toggle mic monitoring on/off

Press the power button to display the battery level Power on/off - Hold the button for 2 seconds to power headset on/off. Battery level status – Press button to see the battery level status on the status LED* and to hear the battery level via voice prompt. *The status LED will automatically turn off