Cloud III Series

It is recommended to fully charge your headset before first use. To charge the headset, plug the headset to a USB port with the included USB-C charge cable. When charging the headset, the headset status LED will indicate the current charge status. Charge Status Status LED Fully Charged Solid green 6

Power Button Power on/off - Hold the button for 3 seconds to power the headset on/off. Battery level status – Press the button to see the battery level status on the status LED. The status LED will automatically turn off to conserve battery life.

Connect the USB wireless dongle to your device. Set headset mode switch to the WiFi icon. Power on the headset. ​

Locate the Wireless Module. Open the OMEN laptop screen. Identify the wireless receiver module located on the top right corner of the screen bezel. Set the Headset to Adapter Mode. Slide the connection mode switch on the headset to WiFi mode. With the headset in Adapter mode, hold down the power but

*This method is only possible if the OMEN laptop has already previously paired with a compatible Instant Pair headset. Open the NGENUITY software. Go to the Settings tab. Under “Connected Hardware,” select HyperX Wireless Embedded Receiver. Click Pair new headset to set the OMEN system in pairing mo

Mic Mute Button Press the button to turn the mic mute on/off • LED On: Mic muted • LED Off: Mic active Volume Wheel Scroll up or down to adjust the volume level. WARNING: Permanent hearing damage can occur if a headset is used at high volumes for extended periods.

สรุปสั้นๆ: ให้ใช้ฮับ USB ที่มีแหล่งจ่ายไฟภายนอก หากตัวรับสัญญาณไร้สายของคุณใช้งานไม่ได้กับ PS5 หรือระบบอื่นๆ แต่ใช้งานได้ปกติกับอุปกรณ์อื่น ฮับที่ใช้ต้องเป็นแบบมีแหล่งจ่ายไฟภายนอก หากยังคงพบปัญหา โปรดติดต่อเรา ทีมดูแล. หากคุณมีผลิตภัณฑ์ไร้สาย (โดยเฉพาะหูฟัง) ที่เชื่อมต่อด้วยตัวรับสัญญาณ USB ไร้สาย แ

Setting up with PC Right-click the speaker icon > Select Open Sound settings > Select Sound control panel. ​​ Playback Device Set Default Device to "HyperX Cloud III" ​​ Recording Device Set Default Device to "HyperX Cloud III"

Connect the USB wireless dongle to your device. Set headset mode switch to the WiFi icon. Power on the headset. To ensure the headset is configured correctly on the PC, follow the steps below. Right-click on the sound icon in the system tray and select Sound Settings. Set the output device to Speake

HyperX Cloud III S Wireless User Manual