ศูนย์สนับสนุน HyperX
บทความฐานความรู้
บทความฐานความรู้
Power off the headset. Carefully pull the right ear cushion from the headset. Unscrew the 4x Phillips screws to separate the driver cover from the right earcup. Gently separate the cover from the earcup to avoid any damage. Locate and remove the battery secured with the connector. Place new battery
Knowledge Base Article
•
Cloud III S Wireless
It is recommended to fully charge your headset before first use. To charge the headset, plug the headset to a USB port with the included USB-C charge cable. When charging the headset, the headset status LED will indicate the current charge status. Charge Status Status LED Fully Charged Solid green 6
Knowledge Base Article
•
Cloud III S Wireless
Connect the USB wireless dongle to your device. Set headset mode switch to the WiFi icon. Power on the headset.
Knowledge Base Article
•
Cloud III S Wireless
*This method is only possible if the OMEN laptop has already previously paired with a compatible Instant Pair headset. Open the NGENUITY software. Go to the Settings tab. Under “Connected Hardware,” select HyperX Wireless Embedded Receiver. Click Pair new headset to set the OMEN system in pairing mo
Knowledge Base Article
•
Cloud III S Wireless
The Cloud III S Wireless is **not** compatible with Xbox.
Knowledge Base Article
•
Cloud III S Wireless
Locate the Wireless Module. Open the OMEN laptop screen. Identify the wireless receiver module located on the top right corner of the screen bezel. Set the Headset to Adapter Mode. Slide the connection mode switch on the headset to WiFi mode. With the headset in Adapter mode, hold down the power but
Knowledge Base Article
•
Cloud III S Wireless
Double press the power button to switch between OMEN gaming laptop connection and USB wireless dongle connection.
Knowledge Base Article
•
Cloud III S Wireless
HyperX Cloud III S Wireless User Manual
Knowledge Base Article
•
Cloud III S Wireless
A. Mic mute / mic monitoring button B. Status LED C. Power button D. USB-C charge port E. Microphone port F. Multifunction button G. Volume wheel H. Mode switch I. Removeable earcup plates J. Detachable microphone K. Microphone mute LED L. USB wireless dongle M. Dongle status LED N. Pairing pin hole
Knowledge Base Article
•
Cloud III S Wireless
Instant Pair should be possible as long as the OMEN laptop is “Connection Ready” in NGENUITY settings and the headset has not been previously paired with another OMEN laptop. If either the OMEN laptop or the headset has been paired already, both the laptop and the headset need the Instant Pair pairi
Knowledge Base Article
•
Cloud III S Wireless