Cloud Stinger Series

Yes, like the Xbox controller, the headset will turn off automatically if the console is powered off. Conversely, powering on the headset will power on the console from standby mode.

Power ON the Xbox console. Press the connect button on the Xbox Console. The Xbox logo on the console will blink when it's ready to connect. Power on the headset by pressing and holding the pairing button for 3 seconds to enter pairing mode. The headset status LED will blink green when it's ready. T

Cloud Stinger Wireless Specifications Headphone Driver: Dynamic, 50mm with neodymium magnets Type: Circumaural, Closed back Frequency response: 20Hz-20,000Hz Impedance: 32 Ohm Sound pressure level: 109dBSPL/mW at 1kHz T.H.D.: < 2% Weight: 270g Cable length and type: USB charging cable (1m) Microphon

Headphone Driver: Dynamic, 40mm with neodymium magnets Type: Circumaural, closed back Frequency response: 20Hz-20,000Hz Impedance: 16 Ω Sound pressure level: 99dBSPL/mW at 1kHz THD: < 2% Weight: 215g Cable length and type: Headset (1.3m) Connection: Headset - 3.5mm plug (4 pole) Microphone Element E

Cloud Stinger Core 7.1 Audio Control Features Volume Wheel Scroll up or down to adjust the volume level. WARNING: Permanent hearing damage can occur if a headset is used at high volumes for extended periods of time Swivel to Mute Microphone ​

Status LED Headset Status LED Pairing - Flashing green and red every 0.2s Searching - Slow breathing green Connected - 90%-100% Battery Solid green Connected - 15%-90% Battery Blinking green Connected -

Usage (Nintendo Switch™) To use the headset with Nintendo Switch™, connect the 3.5mm plug on the headset directly to the 3.5mm jack on the Nintendo Switch™.

1. Connect the wireless USB adapter to your device. 2. Power on the headset. 3. Follow the instructions on the DTS instructions card to enabled DTS® Headphone:X®. Please note there is no code to enter for this product; the USB will authenticate the app.

Headset volume, chat mixer, and mic monitoring levels are designed to be adjusted/toggled through the headset hardware. Mic monitoring has only two levels (On/Off) and can’t be adjusted through the UI.

Cloud Stinger Wireless User Manual