Центр поддержки HyperX
Статьи базы знаний
Статьи базы знаний
1. Go to the home page and select Settings > Sound 2. Under Microphone, set the following: Input Device to USB Headset (HyperX Cloud Core Wireless) 3. Under Audio Output, set the following: Output Device: USB Headset (HyperX Cloud Core Wireless) Output to Headphones: All Audio 4. Under Volume, set H
Knowledge Base Article
•
Cloud Core Wireless DTS
Cloud Core Wireless DTS Overview A. Status LED B. Power Button C. Mic Mute / Mic Monitoring button D. Volume Wheel E. USB-C Charge Port F. Microphone Port G. Detachable Microphone H. USB Adapter I. Wireless Pairing Pin Hole J. Wireless Status LED K. USB-C Charge Cable L. DTS Instruction Card
Knowledge Base Article
•
Cloud Core Wireless DTS
Technical Specifications Headset Transducer type: Dynamic 53mm Operating principle: Closed Frequency response: 15Hz-25KHz Nominal impedance: 60 ohm per system Nominal SPL: 98+/-3dB THD: < 2% • Power handling capacity: 150mW Sound coupling to the ear: Circumaural Ambient noise attenuation: Approx. 20
Knowledge Base Article
•
Cloud Core
In-line audio control operation The in-line audio control contains a volume wheel to adjust the headphone output volume and a microphone mute slider to mute the microphone. To increase the headset volume rotate the volume wheel clockwise (towards the + sign). To reduce the volume, rotate the volume
Knowledge Base Article
•
CloudX
Cloud Core Overview A. Leatherette headband w/ HyperX logo B. Aluminium arm to adjust the headband C. Attached cable w/ 3.5mm input jack D. Detachable microphone with adjustable arm and condenser E. Mini 3.5mm jack plug (4 pole) F. PC extension cable
Knowledge Base Article
•
Cloud Core
Cloud Usage (PC) To connect the headset to your computer (or other devices) that has both a headphone jack and a microphone jack, connect the headset’s 3.5mm plug to the female jack on the PC extension cable. The PC extension cable has two 3.5mm jacks. The audio plug, which has green stripes, plugs
Knowledge Base Article
•
Cloud
The headset and USB adapter are automatically paired together out of the box. But if the manual pairing is needed, follow the steps below to pair the headset and USB adapter. 1. While the headset is powered off, hold down the power button until the headset status LED starts blinking red/green rapidl
Knowledge Base Article
•
Cloud Core Wireless DTS
Cloud Core 7.1 Overview A. Gaming Headset B. Detachable microphone C. USB Sound Card D. Microphone Mute E. 7.1 Virtual Surround Sound F. Headphone Volume G. Microphone Volume
Knowledge Base Article
•
Cloud Core 7.1