Cloud Flight Series

Although Cloud Flight S is compatible with PS4, the chat mixer feature is only supported on PC.

To enable/disable mic monitoring on Cloud Flight S, press the mic monitoring toggle pictured below.

This may be caused by environmental interference around where the USB adapter is plugged in. Below are some tips that may help address this issue: Avoid plugging the dongle into USB hubs near other peripherals. This is especially true when using externally-powered hubs or accessories, as the electri

Cloud Flight S User Manual

Cloud Flight S LED Status ​ Status Pairing - Flash Green and Red every .5 seconds Searching - Slow breathing Green Battery Level 90%-100% - Solid Green 15%-90% - Blinking Green

Charging It is recommended to fully charge your headset before first use. When the charging cable is connected the ear cup LED will indicate the status. Power Power on - Hold down power button for 3 secs until you hear a beep. Power off - Hold down power button for 3 secs until you hear a beep. LED

Cloud Flight S Specifications Headphone Driver: Dynamic, 50mm with neodymium magnets Type: Circumaural, Closed back Frequency response: 10Hz–20kHz Impedance: 32 Ω Sound pressure level: 99.5dBSPL/mW at 1kHz T.H.D.: < 1% Weight: 310g Weight with mic: 320g Cable length and type: USB charge cable (1m) M

20 meters (65 feet) is the effective wireless range in optimal conditions. Environmental conditions such as obstacles, interference from other wireless signals, etc., will reduce the effective range

Yes. However, for best user experience we do not recommend charging the headset during use due to possible white noise (static).

If the light on the headset is turned off and the volume is at 50%, the battery should last about 30 hours. The battery will drain faster if you have the volume higher or the lighting effects turned on. By default, the light will be on when the headset is turned on. Short press the power button to t