Cloud Alpha Family

Charging the Headset It is recommended to fully charge your headset before first use. When charging the headset, the headset status LED will indicate the current charge status. Wired Charging: To charge the headset via wired, plug the headset to a USB port with the USB charge cable.

NGENUITY should automatically swap back to the hardware audio endpoints when the software and audio engine are not running. Check Windows sound settings and make sure the following devices are assigned correctly to the hardware endpoints: Default playback device: Headphones (HyperX Cloud Alpha 2 Wir

Cloud Alpha Wireless Quick Start Guide

Кнопка отключения микрофона 3,5-мм разъем для наушников Разъем для микрофона колесо регулировки громкости Съемный микрофон Светодиод отключения микрофона Удлинительный кабель для ПК 3,5 мм USB-адаптер Адаптер USC-C на USB-A Съемный кабель 3,5 мм (5-контактный на 4-контактный)

Cloud Alpha Wireless User Manual

*Advanced Troubleshooting. Do not attempt if you are unsure. We highly recommend reaching out to the HyperX support team for assistance. - Verify that the DTS APO service "DtsHpXV2Apo4Service" is running. Can be checked in Windows "Services" App. If DTS APO service is not running, try installing Vis

Overview A. Status LED B. Power Button C. Mic Mute / Mic Monitoring Button D. USB-C Charge Port E. Microphone Port F. Volume Wheel G. Detachable Microphone H. Microphone Mute LED I. USB Adapter J. Wireless Status LED K. Wireless Pairing Pin Hole L. USB Charge Cable

Setup The headset features a detachable cable and detachable microphone. To connect the detachable headset cable, locate the end with the headphone icon label and plug the cable into the female jack on the left headset ear cup. The plug and ear cup female jack both have a grey color for easy identif

Cloud Alpha S User Manual

Controls Status LED *Battery level indication *The status LED will automatically turn off to conserve battery life Power Button Hold for 3 seconds to power headset on/off Press to hear battery level voice prompt Mic mute / mic monitoring button Press to toggle mic mute on/off LED On – Mic muted LED