Fone de ouvido

Cloud III Quick Start Guide

Status Adapter Mode Dual Mode Pairing Fast blinking white Fast blinking blue Searching Blinking white Blinking purple Connected Solid-fade white for 5 seconds Solid-fade purple for 5 seconds

The headset and USB adapter are automatically paired together out of the box. But if the manual pairing is needed, follow the steps below to pair the headset and USB adapter. 1. While the headset is powered off, hold down the power button until the headset status LED starts blinking red/green rapidl

Prima o botão de silenciar o microfone para ativar/desativar a funcionalidade: LED aceso: Microfone silenciado LED desligado: Microfone ativo

Mic Mute Button Press the button to turn the mic mute on/off • LED On: Mic muted • LED Off: Mic active Volume Wheel Scroll up or down to adjust the volume level. WARNING: Permanent hearing damage can occur if a headset is used at high volumes for extended periods.

Slide the headset wireless mode switch to the WiFi symbol. Connect the USB wireless dongle to your device. Power ON the headset.

Power Button Power on/off - Hold the button for 3 seconds to power the headset on/off. Battery level status - Press the button to see the battery level status on the status LED. *The status LED will automatically turn off to conserve battery life. *Battery level indication

​​ Please note that no Cloud III wired settings configured within NGENUITY are saved onto the headset (USB). They will not persist when used with another system.

Setting up with PC Right-click the speaker icon > Select Open Sound settings > Select Sound control panel. Playback Device Set the Default Device to “HyperX Cloud III Wireless” Recording Device Set the Default Device to “HyperX Cloud III Wireless”

Cloud Stinger Core User Manual