Fone de ouvido

Cloud II Overview ​ A. Leatherette Headband w/ HyperX Logo B. Aluminuk Arm to Adjust Headband C. Attached Cable w/3.5mm input jack D. Detachable Microphone with Adjustable Arm and Condenser E. 3.5mm Audio Input Jack F. Extra Set of Ear Cushions G. Control Box Cable w/ USB Connector and Control Box H

Power ON the Xbox console. Press the connect button on the Xbox Console. The Xbox logo on the console will blink when it's ready to connect. Power on the headset by pressing and holding the pairing button for 3 seconds to enter pairing mode. The headset status LED will blink green when it's ready. T

Cloud Core Wireless DTS User Manual

Technical Specifications ​ Headset • Transducer type: Dynamic 53mm with Neodynium Magnets • Operating principle: Closed • Frequency response: 15Hz-25KHz (earphones) • Nominal impedance: 60 ohm per system • Nominal SPL: 98+/-3dB • T.H.D: < 2% • Power handling capacity: 150mW • Sound coupling to the e

It is recommended to fully charge your headset before first use.

Using with Xbox, PlayStation, or Nintendo Switch ​

Usage (PlayStation® 4) To use the HyperX Cloud Core headset with PlayStation 4 (PS4™), connect the 3.5mm jack on the headset directly to the PS4 game controller and follow these steps: 1. Turn on your PS4 game console. 2. Navigate to the Settings menu and select it. 3. Highlight the ‘Devices’ menu o

Single Press - Play / Pause / Answer Call Double Press - Skip Track / End Call / Reject Call Triple Press - Previous Track Long Press (2S) - Activate Voice Assistant *Button functionality can vary between devices and apps.

The headset and USB adapter are automatically paired together out of the box. But if the manual pairing is needed, follow the steps below to pair the headset and USB adapter. 1. While the headset is powered off, hold down the power button until the headset status LED starts blinking red/green rapidl

If the headset is connected to the wireless USB adapter, the headset will automatically power off after 20 minutes of no playback audio activity. If the headset is not connected to the wireless USB adapter, the headset will automatically power off after 3 minutes.