Cloud Stinger Family

​ Status LED Status Battery Level LED Searching: Slow breathing green Connected: 90% - 100% Solid green for 5s 10% - 90% Blinking green for 10s < 10% Blinking red for 10s *Battery level indication *The status LED will automatically turn off to conserve battery life Power Button • Hold for 3 seconds

​ Plug the headset into the controller via 3.5mm jack

Slide the Wireless mode switch to the Bluetooth symbol Press and hold both the power button and the multifunction buttons for 2 seconds. Pairing mode is active when the LED blinks blue and the voice prompt says "Bluetooth pairing". Go to your device's Bluetooth settings and connect to "HyperX Cloud

Cloud Stinger Wireless Manually Pairing Headset and Wireless Adapter The headset and wireless adapter are already paired together for first-time use. If manual pairing is necessary, follow the steps below to pair the headset and wireless adapter together. 1. Make sure the headset is powered off. 2.

Press down on the volume wheel to enter/exit chat mixed mode. Scroll wheel to adjust balance between game and chat audio. *Supported only on Xbox consoles in Xbox configuration

Cloud Stinger Wireless Nintendo Switch Compatibility 1. Connect the wireless adapter to a side USB port on the Nintendo Switch dock. 2. Power on the headset. 3. When the wireless adapter status light is solid, the headset is now connected to the adapter. *You may set the USB audio volume on Switch t

Cloud Stinger 2 Microphone Function ​

Cloud Stinger Core User Manual

Cloud Stinger Specifications Headphone Driver: Dynamic, 50mm with neodymium magnets Type: Circumaural, closed back Frequency response: 18Hz–23,000 Hz Impedance: 30 Ω Sound pressure level: 102dBSPL/mW at 1kHz · THD: < 2% Input power: Rated 30mW, maximum 500mW · Weight: 275g Cable length and type: Hea

CHARGE STATUS LED Fully Charged: Solid Green 15%-99%: Breathing Green