Cloud Alpha 2 Series

Power OFF the headset. Carefully pull the right ear cushion from the headset. Unscrew the 4x Phillips screws to separate the driver cover from the right earcup. Gently separate the cover from the earcup to avoid any damage. Locate and remove the battery secured with a connector. Place new battery ma

Slide the wireless mode switch to Dual mode. The headset will enter Bluetooth pairing on the first setup. Go to your device Bluetooth settings, search, and connect to "HyperX Cloud Alpha 2 Wireless". ​

Go to the home page and select Settings > Sound. For Microphone, set the Input Device to USB Headset "HyperX Cloud Alpha 2 Wireless Chat". For Audio Output, set the Output Device to USB Headset "HyperX Cloud Alpha 2 Wireless Game". For Output to Headphones, set to All Audio.

Single Press: Play / Pause, Answer Call Double Press: Skip Track, End Call, Reject Call Triple Press: Previous Track Long Press (2 seconds): Activate Voice Assistant Note: Button functionality can vary between devices and apps.

Mic mute toggle: Press button to turn the mic mute on / off. Mic monitoring toggle: Hold button for 2 seconds to toggle mic monitoring on / off.

A. Status LED B. Power button C. Mic mute / monitoring button D. 3.5mm headset jack E. USB-C charge port F. Microphone poort G. Wireless mode switch H. Multifunction button I. Volume wheel J. Base station K. Base station USB-C port L. 3.5mm line out port M. 3.5mm line in port N. Detachable microphon

A. Line out / headset mode switch: Switch audio between 3.5mm line out or headset. B. Volume wheel: Rotate wheel to adjust playback volume level. C. Mic mute: Press button to toggle mic mute on / off. D. Buttons Mic gain: Rotate wheel to adjust mic gain level. Game / Chat mix: Rotate wheel to adjust

Power on / off: Hold button for 2 seconds to power headset on / off. Battery level status: Press button to check the battery level. The status LED will automatically turn off to conserve battery life. Battery Level Headset Status LED 61% to 100% Solid-fade green 21% to 60% Solid-fade yellow 7% to 20

Use cable to connect the headset and devices directly with 3.5mm jacks.

Make sure that the HyperX Audio Drivers are installed. Check Windows sound settings and make sure the following devices are assigned correctly: Default playback device: NGENUITY -- 8 Channel Spatial Default playback communications device: NGENUITY -- Chat Default recording device: NGENUITY -- Microp