QuadCast Family

A. Tap-to-Mute Sensor B. LED ring C. Multifunction control D. 3.5mm headphone port E. USB-C port F. USB-C to USB-C cable G. USB-C to USB-A adapter

Press the multifunction button to cycle between adjustment modes, shown by the [microphone] and [headset] LED's. The multifunction control's LED ring will indicate the setting of the currently selected mode. ​

Installing Quadcast Microphone the Mount Adapter Secure the included mount adapter onto a microphone boom arm. The mount adapter supports 3/8" and 5/8" thread sizes. Remove both the thumbscrew and nut from the microphone stand. Remove the microphone stand from the microphone. Align the mount adapter

QuadCast 2 S should be placed with the front of the microphone facing the sound source. The side with HyperX logo is the front side. ​

Tap the top of the microphone to mute/unmute the microphone. The microphone status LED will indicate the current mute status. ​

Press and hold the multifunction control button and tap-to-mute sensor for 10 seconds to factory reset the microphone. All red LEDs (include the top LED ring) will flash when the factory reset has been triggered.

Hold and turn gently to remove or attach microphone to the shock mount.

Hold the volume knob down for 2 seconds to change the polar pattern

​​ Connect the microphone to a USB port on the PS4 with the included USB cable. To ensure the microphone is configured with the most optimal settings on the PS4, follow the steps below: From the PS4 main menu, go to Settings > Devices > Audio Devices Set Input Device to USB Headset (HyperX QuadCast)

QuadCast 2 Connecting Headphones *HyperX Cloud III Wired Not Included ​