Clutch Wireless Gaming Controller

HyperX Clutch Wireless Gaming Controller Quick Start Guide

Calibration Calibration can address issues related to analog sticks and triggers. To activate calibration mode: Set the mode selection switch to USB. Hold down Start and Select. While still holding down both buttons from the previous step, plug in the USB-C cable. Continue holding down both buttons

To toggle the controller on / off when in 2.4G or Bluetooth mode, press the Home button. The controller will attempt to connect to your device. The controller will automatically shut off after 5 minutes of inactivity. To switch to Handheld mode, attach the mobile clip and insert a phone. ​ ​​ ​ Fold

Controller Specifications Connection type: 2.4GHz Wireless / Bluetooth 4.2 / Wired Compatibility: Android, PC Battery Specifications Battery life Up to 19 hours* Battery capacity 600mAh Physical Specifications Length: 110.3mm** Height: 75.1mm** Width: 155.6mm Mobile clip dimensions; 41mm – 86mm Weig

HyperX Clutch Wireless Gaming Controller User Manual

A. Action Buttons B. Analog Sticks (L3/R3) C. D-Pad D. Home Button E. Mode Selection Switch F. Bumpers (L1/R1) G. Triggers (L2/R2) H. USB-C Port I. Convertible Mobile Clip J. 2.4GHz Wireless Adapter K. USB-C to USB-A Cable

HyperX Clutch X-Input & DirectInput On PC, the controller supports both X-Input and DirectInput functionality. By factory default, the controller is in X-Input Mode and will save the last Input Mode selected. Switch between X-Input and DirectInput Place the controller in 2.4G or USB mode. Turn on an

Turbo Turbo can be assigned to individual buttons to emulate repeated button presses. After setting Turbo, press and hold the desired button. Turbo can only be assigned to L3, R3, A, B, X, Y, LT, RT, LB, RB and D-Pad.

Calibration Calibration can address issues related to analog sticks and triggers. To activate calibration mode: Set the mode selection switch to USB. Hold down Start and Select. While still holding down both buttons from the previous step, plug in the USB-C cable. Continue holding down both buttons

​Reset The controller can be manually power cycled by pressing the pinhole button on the rear of the controller. Once you've successfully reset the controller, you must calibrate the device. ​