Cloud Flight Family

Headset Controls Power button Hold the power button for 3 seconds to power on/off the headset. With the headset powered on, short press the power button to cycle through the ear cup LED modes. The supported LED modes are solid (default), breathing, and off. Volume wheel Rotate the volume wheel up or

Status LED for adapter and bluetooth mode

To enable/disable mic monitoring on HyperX CloudX Flight, press and hold the Microphone Mute button for 3 seconds.

Charging It is recommended to fully charge your headset before first use. When the charging cable is connected the ear cup LED will indicate the status. Power Power on - Hold down power button for 3 secs until you hear a beep. Power off - Hold down power button for 3 secs until you hear a beep. LED

Cloud Flight S Specifications Headphone Driver: Dynamic, 50mm with neodymium magnets Type: Circumaural, Closed back Frequency response: 10Hz–20kHz Impedance: 32 Ω Sound pressure level: 99.5dBSPL/mW at 1kHz T.H.D.: < 1% Weight: 310g Weight with mic: 320g Cable length and type: USB charge cable (1m) M

CloudX Flight 2 Quick Start Guide

20 meters (65 feet) is the effective wireless range in optimal conditions. Environmental conditions such as obstacles, interference from other wireless signals, etc., will reduce the effective range

Read all instructions below, before attempting to replace the battery. Power OFF the headset. Carefully pull the right ear cushion from the headset. Note how it's slotted into the earcup. Unscrew the 4x Phillips screws to separate the driver cover from the right earcup. Gently separate the cover fro

Slide the mode switch to Bluetooth. Press and hold both the power button and the multifunction button for 2 seconds. Pairing mode is active when the LED blinks blue and the voice prompt says, "Bluetooth pairing". Go to your device's Bluetooth settings and connect to "HyperX Cloud Flight 2 Wireless".

Cloud Flight for PS Quick Start Guide